Blank Cover Image

YAGレーザによる歯科治療の照射温度に関する研究

フォーマット:
論文
責任表示:
上田, 隆司 ; Ueda, Takashi
言語:
日本語
出版情報:
2002-03-25
著者名:
掲載情報:
平成12(2000)年度 科学研究費補助金 基盤研究(B) 研究成果報告書概要 = 2000 Fiscal Year Final Research Summary
巻:
1999 – 2000
開始ページ:
2p.
バージョン:
author
概要:
金沢大学工学部<br />レーザによる治療では,照射によって歯質を溶かし蒸発させる除去形態をとることから,患部は瞬間的にせよ相当の高温になると考えられる,発熱が大きすぎると,歯髄の温度が上がり,痛みを感じるだけでなくその変質をまねき,時には歯髄は死んでしまう.本研究は,光ファイバ型2色温度計を用いて,歯にパルスレーザ照射した際のフラッシュ温度測定を行う方法について検討するとともに,歯における熱伝導現象を工学的な立場から検討することにより,レーザによる歯の治療を安全 にかつ効率よく行う方法を確立することを目的としておこなった.得られた主な結果をまとめると次のようになる.(1)本温度測定法により,歯のレーザ照射部の温度を計測することができる.(2)照射するレーザエネルギーが一定の場合,短時間に強いレーザパワーを与えた方が照射温度は高くなる.(3)照射するレーザの強さ(パワー)が一定の時,照射時間を長くすれば,照射温度は高くなる.(4)う蝕部と健全部のレーザ吸収率の差から,条件を適当に選べば400℃近い温度差を生じさせることが可能であり,う蝕部のみを除去する治療の可能性が十分にある.(5)歯組織の熱伝導率が小さいため,温度勾配が急となり内部への影響は小さくなるが,エナメル質に比べて吸収率が大きく透光性のよい象牙質では,熱が深部にまで到達するため注意を要する.(6)Er-YAGレーザは水に対する吸収率が大きいことから,大部分が歯表面で吸収され,歯髄に及ぼす熱の影響はNd-YAGレーザよりもはるかに小さく抑えられる.このため,レーザエネルギーを上げて,大きな除去量を得ることも可能である.(7)Nd:YAGレーザで歯の割れが生じる原因について調べたところ,熱応力によるひび割れはEr-YAGレーザでも起こる.また,レーザの照射方法に工夫すればNd:YAGレーザにおいても熱亀裂を防ぐことができる.<br />The flush temperature of a dental hard tissue irradiated with pulsed YAG laser is measured using a two-color pyrometer with an optical fiber. This pyrometer consists of a chalcogenide optical fiber and a laminated infrared detector.The influence of the laser power on the temperature of the dental tissue is investigated, and the relation between the laser power and the removal volume of the dental tissue is obtained. In order to examine the thermal damage on the dental tissue, hardness and bending strength of the tissue are measured after being heated electrically at various temperature. FEM thermal analysis is conducted to estimate the temperature distribution in a teeth and to discuss the influence of heat flux on the dental pulp. The result obtained are as follows. The appcarance of the tissue begins to change at about 200℃ and its hardness decreases with the increase of temperature. Its bending strength starts to decrease at about 50℃. Only the carious tissue can be removed from the cavity due to the large difference of energy absorptivity between the tissue and the carious one. It is possible to protect the dental pulp from thermal damage, because the temperature gradient in the teeth is very steep due to the small thermal conductivity of the dental tissue.<br />研究課題/領域番号:11470413, 研究期間(年度):1999 – 2000<br />出典:「YAGレーザによる歯科治療の照射温度に関する研究」研究成果報告書 課題番号11470413(KAKEN:科学研究費助成事業データベース(国立情報学研究所))(https://kaken.nii.ac.jp/ja/report/KAKENHI-PROJECT-11470413/114704132000kenkyu_seika_hokoku_gaiyo/)を加工して作成 続きを見る
URL:
http://hdl.handle.net/2297/00063911
タイトル・著者・出版者が同じ資料

類似資料:

1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
 
10
 
11
 
12
 

青木, 慎太郎, 葛西, 惇士, 上田, 隆司, 細川, 晃, 古本, 達朗, 田中, 隆太郎, Aoki, Shintaro, &hellip;

精密工学会 = The Japan Society for Precision Engineering

上田, 隆司, 山田, 啓司, 古本, 達明

精密工学会 = The Japan Society for Precision Engineering

上田, 隆司(1948-)

[上田隆司]

細川, 晃, 南部, 彰, 田中, 隆太郎, 山田, 啓司, 上田, 隆司, Hosokawa, Akira, Nambu, Akira, Tanaka, Ryutaro, Yamada, Keiji, Ueda, Takashi

精密工学会 = The Japan Society for Precision Engineering

山田, 啓司, 上田, 隆司, 細川, 晃, 田中, 隆太郎, 堀居, 直幸, Yamada, Keiji, Ueda, Takashi, Hosokawa, Akira, Tanaka, Ryutaro

精密工学会 = The Japan Society for Precision Engineering

古本, 達明, 上田, 隆司, 細川, 晃, 田中, 隆太郎, 嵐, 友哉, 杉原, 成良, 和賀, 正明, 今野, &hellip;

精密工学会 = The Japan Society for Precision Engineering

古本, 達明, 上田, 隆司, 嵐, 智哉, 杉原, 成良, 和賀, 正明, 今野, 明, Furumoto, Tatsuaki, Ueda, &hellip;

精密工学会 = The Japan Society for Precision Engineering

上田, 隆司, 古本, 達明

レーザ加工学会

上田, 隆司, 山田, 啓司, 篠崎, 道, 細川, 晃

精密工学会 = The Japan Society for Precision Engineering

堀居, 直幸, 上田, 隆司, 細川, 晃平, 山田, 啓司, 田中, 隆太郎, Horii, Naoyuki, Ueda, Takashi, Hosokawa, Akira, Yamada, Keiji, Tanaka, Ryutaro

精密工学会 = The Japan Society for Precision Engineering

山崎, 修平, 田中, 隆太郎, 細川, 晃, 上田, 隆司, 古本, 達明

精密工学会 = The Japan Society for Precision Engineering