Recovery of toxic metal ions from washing effluent containing excess aminopolycarboxylate chelant in solution

フォーマット:

論文

責任表示:

Hasegawa, Hiroshi ; Rahman, Ismail M.M. ; Nakano, Masayoshi ; Begum, Zinnat A. ; Egawa, Yuji ; Maki, Teruya ; Furusho, Yoshiaki ; Mizutani, Satoshi

言語:

英語

出版情報:

Elsevier, 2011-10-15

著者名:

Hasegawa, Hiroshi

Rahman, Ismail M.M.

Nakano, Masayoshi

Begum, Zinnat A.

Egawa, Yuji

Maki, Teruya

Furusho, Yoshiaki

Mizutani, Satoshi

続きを見る

掲載情報:

Water Research

ISSN:

0043-1354      

巻:

45

通号:

16

開始ページ:

4844

終了ページ:

4854

バージョン:

author

概要:

Aminopolycarboxylate chelants (APCs) are extremely useful for a variety of industrial applications, including the treatment of toxic metal-contaminated solid waste materials. Because non-toxic matrix elements compete with toxic metals for the binding sites of APCs, an excess of chelant is commonly added to ensure the adequate sequestration of toxic metal contaminants during waste treatment operations. The major environmental impacts of APCs are related to … their ability to solubilize toxic heavy metals. If APCs are not sufficiently eliminated from the effluent, the aqueous transport of metals can occur through the introduction of APCs into the natural environment, increasing the magnitude of associated toxicity. Although several techniques that focus primarily on the degradation of APCs at the pre-release step have been proposed, methods that recycle not only the processed water, but also provide the option to recover and reuse the metals, might be economically feasible, considering the high costs involved due to the chelants used in metal ion sequestration. In this paper, we propose a separation process for the recovery of metals from effluents that contain an excess of APCs. Additionally, the option of recycling the processed water using a solid phase extraction (SPE) system with an ion-selective immobilized macrocyclic material, commonly known as a molecular recognition technology (MRT) gel, is presented. Simulated effluents containing As(V), Cd(II), Cr(III), Pb(II) or Se(IV) in the presence of APCs at molar ratios of 1:50 in H2O were studied with a flow rate of 0.2mL min-1. The 'captured' ions in the SPE system were quantitatively eluted with HNO3. The effects of solution pH, metal-chelant stability constants and matrix elements were assessed. Better separation performance for the metals was achieved with the MRT-SPE compared to other SPE materials. Our proposed technique offers the advantage of a non-destructive separation of both metal ions and chelants compared to conventional treatment options for such effluents. © 2011 Elsevier Ltd. 続きを見る

URL:

http://hdl.handle.net/2297/29476