カバリングマシンの自動糸交換装置の開発: (第7報) 糸通しの挙動解析による成功率向上と空気動力の軽減

フォーマット:

論文

責任表示:

八田, 潔 ; 堀, 純也 ; 喜成, 年泰 ; 新宅, 救徳

言語:

日本語

出版情報:

繊維機械学会 = Textile Machinery Society of Japan, 1999-01-01

著者名:

• 八田, 潔
• 堀, 純也
• 喜成, 年泰
• 新宅, 救徳

掲載情報:

繊維機械学会誌 = Journal of the Textile Machinery Society of Japan

ISSN:

0371-0580      

巻:

52

通号:

5

開始ページ:

T72

終了ページ:

T78

バージョン:

publisher

概要:

It is important to improve the rates of success on drawing-in operation of the auto-doffer for the covering machine. Saving air consumption for drawing-in operation can bring about the total energy saving on the doffing operations. In this report, various conditions on the drawing-in operations are investigated in order to improve its success rates and to reduce its air consumption. Experiments were performed with changing supplied pressures for the injector and … for the ejector, yarn feed speeds and their working time. Acting forces such as the air drag on a spandex yarn were measured and the behaviors of a running yarn were observed during the drawing-in operations. Results obtained are as follows : (1) Each yarn has the unique drawing-in condition in order to improve the rate of success. The higher pressure does not always bring about the higher rate of success for the injector, but for the ejector within the limits of these experiments. (2) The fine tuning in the working time of the injector or the ejector is not so significant because the yarn in the hollow spindle is extended cyclically by the turbulent air flow. The governing factor for the successful drawing-in operation is the yarn capture at the suction entrance. Yarn feed tuning by means of some pooling devices is prefer to the yarn feed rollers. (3) The velocity of air jet from subsonic to sonic region is the most efficient for drawing-in operation. Further pressure causes the air flow disturbance that may induce the yarn troubles. 続きを見る

URL:

http://hdl.handle.net/2297/45725