※一部利用できない機能があります
Effect of Cooling Rate on the Mechanical Strength of Carbon Fiber-Reinforced Thermoplastic Sheets in Press Forming
- フォーマット:
- 論文
- 責任表示:
- Tatsuno, Daichi ; Yoneyama, Takeshi ; Kawamoto, Kiichiro ; Okamoto, Masayuki
- 言語:
- 英語
- 出版情報:
- Springer New York LLC, 2017-07-01
- 著者名:
- 掲載情報:
- Journal of Materials Engineering and Performance
- ISSN:
- 1059-9495
- 巻:
- 26
- 通号:
- 7
- 開始ページ:
- 3482
- 終了ページ:
- 3488
- バージョン:
- author
- 概要:
- The purpose of this study is to elucidate the effect of the cooling rate of the carbon fiber-reinforced thermoplastic (CFRTP) sheets on the mechanical property in the press forming within 1 min cycle time. In order to pay attention only to the compression stage after the deformation stage in press forming, a flat sheet of dimensions 200 mm × 100 mm × 3 mm was produced. It was fabricated by stacking 15 CFRTP sheets of 0.2-mm-thick plain woven fabric impregnated with … PA6, preheating them to 280 °C and pressing them at 5 MPa using a die cooled from near the melting temperature of PA6 with various cooling rates. Cooling rate of −26 °C/s with pressure holding time (defined in this study as the period that the pressure sensor detects high pressure) of 7 s and that of −4.4 °C/s with pressure holding time of 18 s gave a flexural strength of 536 and 733 MPa, respectively. It was found that the cooling rate during pressure holding is related to the mechanical property of press-formed CFRTP part. © 2017 ASM International<br />Embargo Period 12 months 続きを見る
- URL:
- http://hdl.handle.net/2297/48455
類似資料:
日本機械学会 = Japan Society of Mechanical Engineers | |
KIT Scientific Publishing | |
Elsevier |
MDPI - Multidisciplinary Digital Publishing Institute |
National Aeronautics and Space Administration, Marshall Space Flight Center |
U.S. Environmental Protection Agency, Office of Research and Development, Corvallis Environmental Research Laboratory |
日本機械学会 | |
U.S. Dept. of Commerce, National Institute of Standards and Technology |