※一部利用できない機能があります
| 1.
論文 |
論文
|
Rahman, Ismail M. M. ; Furusho, Yoshiaki ; Begum, Zinnat A. ; Sabarudin, Akhmad ; Motomizu, Shoji ; Maki, Teruya ; Hasegawa, Hiroshi
概要:
A simple flow-based method was developed for the simultaneous separation of certain transition metal ions (Co, Ni, Cu, Z
…
n, Cd) from aqueous systems, which ions show ecotoxic effects when present at elevated concentrations. A silica-gel-bonded macrocycle system, commonly known as molecular recognition technology (MRT) gel, was used for solid phase extraction (SPE) of the target analytes. The collection behavior of the MRT-SPE system was studied based on pH. Fortified deionized water samples containing 250 μg L-1 of each of the elements were treated at the flow rate of 1 mL min-1. The collected analytes were then eluted by 3 M HNO3 and analyzed using inductively coupled plasma spectrometry. Detection limits of the proposed technique were in the range of 0.004-0.040 μg L-1 for the studied metal ions. The validity of this separation technique was checked with spiked 'real' water samples, which produced satisfactory recoveries of 96-102%. The non-destructive nature and highly selective ion-extraction capability of the SPE material are the most important aspects of the proposed method and they are the main focus of this paper. © 2011 © Versita Warsaw and Springer-Verlag Wien.
続きを見る
|
||||
| 2.
論文 |
論文
|
Hasegawa, Hiroshi ; Rahman, Ismail M. M. ; Nakano, Masayoshi ; Begum, Zinnat A. ; Egawa, Yuji ; Maki, Teruya ; Furusho, Yoshiaki ; Mizutani, Satoshi
概要:
Aminopolycarboxylate chelants (APCs) are extremely useful for a variety of industrial applications, including the treatm
…
ent of toxic metal-contaminated solid waste materials. Because non-toxic matrix elements compete with toxic metals for the binding sites of APCs, an excess of chelant is commonly added to ensure the adequate sequestration of toxic metal contaminants during waste treatment operations. The major environmental impacts of APCs are related to their ability to solubilize toxic heavy metals. If APCs are not sufficiently eliminated from the effluent, the aqueous transport of metals can occur through the introduction of APCs into the natural environment, increasing the magnitude of associated toxicity. Although several techniques that focus primarily on the degradation of APCs at the pre-release step have been proposed, methods that recycle not only the processed water, but also provide the option to recover and reuse the metals, might be economically feasible, considering the high costs involved due to the chelants used in metal ion sequestration. In this paper, we propose a separation process for the recovery of metals from effluents that contain an excess of APCs. Additionally, the option of recycling the processed water using a solid phase extraction (SPE) system with an ion-selective immobilized macrocyclic material, commonly known as a molecular recognition technology (MRT) gel, is presented. Simulated effluents containing As(V), Cd(II), Cr(III), Pb(II) or Se(IV) in the presence of APCs at molar ratios of 1:50 in H2O were studied with a flow rate of 0.2mL min-1. The 'captured' ions in the SPE system were quantitatively eluted with HNO3. The effects of solution pH, metal-chelant stability constants and matrix elements were assessed. Better separation performance for the metals was achieved with the MRT-SPE compared to other SPE materials. Our proposed technique offers the advantage of a non-destructive separation of both metal ions and chelants compared to conventional treatment options for such effluents. © 2011 Elsevier Ltd.
続きを見る
|
||||
| 3.
論文 |
論文
|
Hasegawa, Hiroshi ; Rahman, Ismail M.M. ; Nakano, Masayoshi ; Begum, Zinnat A. ; Egawa, Yuji ; Maki, Teruya ; Furusho, Yoshiaki ; Mizutani, Satoshi
概要:
Aminopolycarboxylate chelants (APCs) are extremely useful for a variety of industrial applications, including the treatm
…
ent of toxic metal-contaminated solid waste materials. Because non-toxic matrix elements compete with toxic metals for the binding sites of APCs, an excess of chelant is commonly added to ensure the adequate sequestration of toxic metal contaminants during waste treatment operations. The major environmental impacts of APCs are related to their ability to solubilize toxic heavy metals. If APCs are not sufficiently eliminated from the effluent, the aqueous transport of metals can occur through the introduction of APCs into the natural environment, increasing the magnitude of associated toxicity. Although several techniques that focus primarily on the degradation of APCs at the pre-release step have been proposed, methods that recycle not only the processed water, but also provide the option to recover and reuse the metals, might be economically feasible, considering the high costs involved due to the chelants used in metal ion sequestration. In this paper, we propose a separation process for the recovery of metals from effluents that contain an excess of APCs. Additionally, the option of recycling the processed water using a solid phase extraction (SPE) system with an ion-selective immobilized macrocyclic material, commonly known as a molecular recognition technology (MRT) gel, is presented. Simulated effluents containing As(V), Cd(II), Cr(III), Pb(II) or Se(IV) in the presence of APCs at molar ratios of 1:50 in H2O were studied with a flow rate of 0.2mL min-1. The 'captured' ions in the SPE system were quantitatively eluted with HNO3. The effects of solution pH, metal-chelant stability constants and matrix elements were assessed. Better separation performance for the metals was achieved with the MRT-SPE compared to other SPE materials. Our proposed technique offers the advantage of a non-destructive separation of both metal ions and chelants compared to conventional treatment options for such effluents. © 2011 Elsevier Ltd.
続きを見る
|
||||
| 4.
論文 |
論文
|
Rahman, Ismail M. M. ; Furusho, Yoshiaki ; Begum, Zinnat A. ; Sabarudin, Akhmad ; Motomizu, Shoji ; Maki, Teruya ; Hasegawa, Hiroshi
概要:
A simple flow-based method was developed for the simultaneous separation of certain transition metal ions (Co, Ni, Cu, Z
…
n, Cd) from aqueous systems, which ions show ecotoxic effects when present at elevated concentrations. A silica-gel-bonded macrocycle system, commonly known as molecular recognition technology (MRT) gel, was used for solid phase extraction (SPE) of the target analytes. The collection behavior of the MRT-SPE system was studied based on pH. Fortified deionized water samples containing 250 ìg L-1 of each of the elements were treated at the flow rate of 1 mL min-1. The collected analytes were then eluted by 3 M HNO3 and analyzed using inductively coupled plasma spectrometry. Detection limits of the proposed technique were in the range of 0.004-0.040 ìg L-1 for the studied metal ions. The validity of this separation technique was checked with spiked 'real' water samples, which produced satisfactory recoveries of 96-102%. The non-destructive nature and highly selective ion-extraction capability of the SPE material are the most important aspects of the proposed method and they are the main focus of this paper. © Versita Sp. z o.o.
続きを見る
|
||||
| 5.
論文 |
論文
|
Hasegawa, Hiroshi ; Rahman, Ismail M. M. ; Kinoshita, Sanae ; Maki, Teruya ; Furusho, Yoshiaki
概要:
金沢大学理工研究域物質化学系<br />A new technique for the separation and pre-concentration of dissolved Fe(III) from the ligand-rich a
…
queous system is proposed. A solid phase extraction (SPE) system with an immobilized macrocyclic material, commonly known as molecular recognition technology (MRT) gel and available commercially, was used. Synthetic Fe(III) solution in aqueous matrices spiked with a 100-fold concentration of EDTA was used. Dissolved iron that was 'captured' by the MRT gel was eluted using hydrochloric acid and subsequently determined by graphite furnace atomic absorption spectrometry. The effect of different variables, such as pH, reagent concentration, flow rate and interfering ions, on the recovery of analyte was investigated. Quantitative maximum separation (~100%) of the dissolved Fe(III) from synthetic aqueous solutions at a natural pH range was observed at a flow rate of 0.2mLmin-1. The extraction efficiency of the MRT gel is largely unaltered by the coexisting ions commonly found in natural water. When compared with different SPE materials, the separation performance of MRT gel is also much higher. © 2010 Elsevier Ltd.
続きを見る
|
||||
| 6.
論文 |
論文
|
Hasegawa, Hiroshi ; Rahman, Ismail M. M. ; Kinoshita, Sanae ; Maki, Teruya ; Furusho, Yoshiaki
概要:
金沢大学理工研究域物質化学系<br />A new technique for the separation and pre-concentration of dissolved Fe(III) from the ligand-rich a
…
queous system is proposed. A solid phase extraction (SPE) system with an immobilized macrocyclic material, commonly known as molecular recognition technology (MRT) gel and available commercially, was used. Synthetic Fe(III) solution in aqueous matrices spiked with a 100-fold concentration of EDTA was used. Dissolved iron that was 'captured' by the MRT gel was eluted using hydrochloric acid and subsequently determined by graphite furnace atomic absorption spectrometry. The effect of different variables, such as pH, reagent concentration, flow rate and interfering ions, on the recovery of analyte was investigated. Quantitative maximum separation (~100%) of the dissolved Fe(III) from synthetic aqueous solutions at a natural pH range was observed at a flow rate of 0.2mLmin-1. The extraction efficiency of the MRT gel is largely unaltered by the coexisting ions commonly found in natural water. When compared with different SPE materials, the separation performance of MRT gel is also much higher. © 2010 Elsevier Ltd.
続きを見る
|
||||
| 7.
論文 |
論文
|
Hasegawa, Hiroshi ; Rahman, Ismail M. M. ; Kinoshita, Sanae ; Maki, Teruya ; Furusho, Yoshiaki
概要:
金沢大学理工研究域物質化学系<br />A new technique for the separation and pre-concentration of dissolved Fe(III) from the ligand-rich a
…
queous system is proposed. A solid phase extraction (SPE) system with an immobilized macrocyclic material, commonly known as molecular recognition technology (MRT) gel and available commercially, was used. Synthetic Fe(III) solution in aqueous matrices spiked with a 100-fold concentration of EDTA was used. Dissolved iron that was 'captured' by the MRT gel was eluted using hydrochloric acid and subsequently determined by graphite furnace atomic absorption spectrometry. The effect of different variables, such as pH, reagent concentration, flow rate and interfering ions, on the recovery of analyte was investigated. Quantitative maximum separation (~100%) of the dissolved Fe(III) from synthetic aqueous solutions at a natural pH range was observed at a flow rate of 0.2mLmin-1. The extraction efficiency of the MRT gel is largely unaltered by the coexisting ions commonly found in natural water. When compared with different SPE materials, the separation performance of MRT gel is also much higher. © 2010 Elsevier Ltd.
続きを見る
|
||||
| 8.
論文 |
論文
|
Rahman, Ismail M. M. ; Begum, Zinnat A. ; Furusho, Yoshiaki ; Mizutani, Satoshi ; Maki, Teruya ; Hasegawa, Hiroshi
概要:
A simple flow-based method was developed for the selective separation of arsenic species (+3 and +5) using a macrocycle-
…
immobilized solid phase extraction (SPE) system, commonly known as molecular recognition technology (MRT) gel. Arsenic species in solution or in the eluent were subsequently quantified with graphite furnace atomic absorption spectrometry. The separation behaviors of As(III) and As(V) on MRT-SPE were investigated. It was found that As(V) can be selectively collected on the SPE system within the range of pH 4 to 9, while As(III) was passed through the MRT-SPE. The retention capacity of the MRT-SPE material for As(V) was found to be 0.25 ± 0.04 mmol g-1. The detection limit of the method for As(V) was 0.06 μg L-1, and the relative standard deviation was 2.9 % (n = 10, C = 1 μmol L-1). Interference from the matrix ions was studied. In order to validate the developed method, certified reference materials of effluent wastewater and groundwater samples were analyzed, and the determined values were in good agreement with the certified values. The proposed method was successfully applied to the speciation analysis of tri- and pentavalent arsenic in natural water samples showing satisfactory recoveries (≥ 98.7 %). © 2013 Springer Science+Business Media Dordrecht.
続きを見る
|
