1.

論文

論文
Ikeya, Noriyuki ; Tanaka, Gengo ; Tsukagoshi, Akira ; 田中, 源吾
出版情報: Palaeontological Society of Japan Special Paper.  2003  pp.37-131,  2003.  日本古生物学会 Palaeontological Society of Japan
URL: http://hdl.handle.net/2297/00061606
概要: 金沢大学国際基幹教育院GS教育系
2.

論文

論文
Tanaka, Gengo ; Ikeya, Noriyuki ; 田中, 源吾
出版情報: Paleontological Research.  6  pp.265-284,  2002-09-30.  日本古生物学会 Palaeontological Society of Japan
URL: http://hdl.handle.net/2297/00061607
概要: 金沢大学国際基幹教育院GS教育系<br />Eighty-five fossil and Recent species of the genus Loxoconcha (Crustacea : Ostracoda) from East As ia are systematically reexamined. On the basis of carapace morphology, the genus Loxoconcha from East Asia is divided into five species groups : L. pulchra, L. optima, L. japonica, L. uranouchiensis and L. japonica species groups. The migration and speciation patterns of four species of the L. japonica species group are as follows. In Late Miocene, L. lilljeborgii and L. tumulosa were distributed over the Paleo-Indian Ocean. In Early Pliocene time, these species migrated to the Western Pacific and L. japonica evolved from populations of L. tumulosa by peramorphic evolution. In the Middle Pleistocene, L. shanhaiensis evolved from populations of L. japonica in the Ryukyu Islands by paedomorphic evolution. 続きを見る
3.

論文

論文
Tanaka, Gengo ; Seto, Koji ; Mukuda, Takao ; Nakano, Yusuke ; 田中, 源吾
出版情報: Paleontological Research.  6  pp.1-22,  2002-04-28.  日本古生物学会 Palaeontological Society of Japan
URL: http://hdl.handle.net/2297/00061608
概要: 金沢大学国際基幹教育院GS教育系<br />Thirty-five ostracod species belonging to 18 genera are recognized from the Middle Miocene Fujina Formation (ca. 14-12 Ma), 3km southwest of Matsue City, Shimane Prefecture, Japan. Most of these species are part of the recent Japan Sea proper water fauna; they are also classified into 4 categories, circumpolar, cryophilic, endemic cool-temperate and temperate species. These ostracod assemblages indicate that the Fujina Formation was deposited under a cold-water environment. Ten new species, Ambtonia shimanensis, A. takayasui, Acanthocythereis fujinaensis, A. izumoensis, Cluthia tamayuensis, C. subjaponica, Kotoracythere tsukagoshii, Laperousecythere ikeyai, Palmoconcha irizukii, and Robertsonites yatsukanus are described. 続きを見る
4.

論文

論文
田中, 源吾 ; Suzuki, Yutaro ; Tanaka, Gengo
出版情報: 化石 = Fossils.  77  pp.1-2,  2005.  日本古生物学会 Palaeontological Society of Japan
URL: http://hdl.handle.net/2297/00061611
概要: 金沢大学国際基幹教育院GS教育系
5.

論文

論文
田中, 源吾 ; 野村, 律夫 ; Tanaka, Gengo ; Nomura, Ritsuo
出版情報: 地質学雑誌 = The journal of the Geological Society of Japan.  115  pp.261-265,  2009.  日本地質学会 The Geological Society of Japan
URL: http://hdl.handle.net/2297/00061615
概要: 金沢大学国際基幹教育院GS教育系<br />島根半島に分布する中部中新統古江層より,介形虫化石群を報告した.本群集はMacrocypris sp., Palmoconcha saboyamensis, Falsobuntonia hayam iiおよびPalmenella limicolaで特徴づけられる.同様なMacrocypris属が卓越する群集は,現在の島根半島沖の寒冷な下部陸棚域に認められる.このことから,本化石群は下部陸棚の環境を示唆すると考えられる.<br />This report provides the first description of ostracod assemblages from the Middle Miocene Furue Formation, Shimane Peninsula, Southwest Japan. The assemblage consists mainly of Macrocypris sp., Palmoconcha saboyamensis, Falsobuntonia hayamii and Palmenella limicola. Based on a comparison among Recent ostracod assemblages, the reported fossil assemblage indicates a cool lower-shelf environment similar to the Recent off Shimane Peninsula. 続きを見る
6.

論文

論文
Tanaka, Gengo ; 田中, 源吾
出版情報: Earth Science = 地球科学.  57  pp.111-127,  2003-06-25.  地学団体研究会 The Association for the Geological Collaboration in Japan (AGCJ)
URL: http://hdl.handle.net/2297/00061617
概要: 金沢大学国際基幹教育院GS教育系<br />島根県,出雲市菅沢の大森層より26属42種の介形虫化石を抽出し,2つの介形虫群(Ambostracon-Argilloecia-Cytheropteron群集およびPaijenborchella- Palmoconcha-Urocythereis pohangensis群集)を認めた.これらの群集は冷温〜温暖な公海の下浅海環境を示唆する.大森層および布志名層からの介形虫化石群の主成分分析は,その堆積環境が上部層準に向かってしだいに深くなっていったことを示唆する.5新種(Cytheropteron shimanense, Loxoconcha izumoensis, Paradoxostoma yakumotatsunus, Schizocythere sakanoueiおよびUrocythereis sugesawensis)を記載した.<br />Ostracods from the Omori Formation in Sugesawa (Izumo City, Shimane Prefecture) comprise 42 species belonging to 26 genera. Five new species, Cytheropteron shimanense, Loxoconcha izumoensis, Paradoxostoma yakumotatsunus, Schizocythere sakanouei and Urocythereis sugesawensis are described. Two ostracod assemblages (Ambostracon-Argilloecia-Cytheropteron assemblage and Paijenborchella-Palmoconcha-Urocythereis pohangensis assemblage) are recognized. These assemblages indicate that the uppermost of the Omori Formation was deposited under the environments from cool to warm open sublittoral condition. Principal components analysis of ostracod assemblages from the Omori and Fujina Formations indicates that, in general, the depositional environment becomes deeper and deeper towards the upper horizon. 続きを見る
7.

論文

論文
Tanaka, Gengo ; 田中, 源吾
出版情報: Journal of Micropalaeontology.  25  pp.187-188,  2006-11.  British Micropalaeontological Society
URL: http://hdl.handle.net/2297/00061631
概要: Sanyuania cuneata Zhao & Whatley, 1992 was reported initially from Late Pleistocene core samples from the northern part of the Yellow Sea and Recent sediments collected from supra tidal pools (17 practical salinity unit (psu)) in Xiangshangang Bay, East China Sea (Zhao & Whatley, 1992). Later, specimens were discovered, but not identified, in Lake Nakaumi, Shimane Prefecture, SW Japan (Fig. 1) (as Cytheridae gen. et. sp. indet. by Tanaka et al. (1998) and Sanyuania sp. by Seto et al. (1999)). Further examination of these Japanese specimens has clarified that they are conspecific with the Chinese specimens. This has provided an opportunity to review the distribution (Fig. 1) and potential environmental significance of Sanyuania cuneata and, for the first time, to describe its appendages (Fig. 2).Specimens figured herein were recovered from Lake Nakaumi (35°26′ 50″ N, 133°07′50″ E) at a depth of 0.3–6.0 m and salinity of 8–17 psu on 9 September 1998. The surface of the sediment was covered by the byssus of the mussel Musculista senhousia (Benson, 1842).Sanyuania cuneata is probably endemic to the East China Sea and the southwestern part of the Sea of Japan and is a potentially useful palaeoenvironmental indicator of brackish (steno-haline) environments in the area. By using the oxygen isotopic data from planktonic foraminifers and the estimated value of salinity flowing into the Japan Sea, Matsui et al. (1998) approximated that the salinity of the surface water of Japan Sea declined to about 20 psu during the Last Glacial Maximum . . . 続きを見る
8.

論文

論文
Tanaka, Gengo ; Smith, Robin J. ; Siveter, David J. ; Parker, Andrew R. ; 田中, 源吾
出版情報: Zoological Science.  26  pp.846-850,  2009-12.  日本動物学会 Zoological Society of Japan
URL: http://hdl.handle.net/2297/00061634
概要: 金沢大学国際基幹教育院GS教育系<br />Compound eyes are common in decapod crustaceans. Decapods have an abundant post-Palaeozoic fossil record, but hitherto morphological information about their eyes has been mainly restricted to Recent material. Here we report the discovery of compound eyes recovered from acetic acid residues of two fish-bearing nodules from the Cretaceous Santana Formation of Brazil; they include what are identified as decapod larval compound eyes. The fossil eyes are comparable to phyllosoma larval eyes because of the following characters: the hemispherical visual surface on a stalked eye; the relatively small-size of the visual surface of the eye; rounded facets are arranged in square arrays in the anterior region; the fact that the neighboring ommatidia are bounded by ridges and/ or grooves; and the more convex inner surface of the cornea lens. This report represents the first description of a three-dimensionally preserved fossil decapod eye. We conclude that the eyes probably represent palinuroid phyllosoma larval eyes and were an adaptation to a planktonic lifestyle. © 2009 Zoological Society of Japan. 続きを見る
9.

論文

論文
田崎, 和江 ; 縄谷, 奈緒子 ; 国峯, 由貴江 ; 森川, 俊和 ; 名倉, 利樹 ; 脇元, 理恵 ; 朝田, 隆二 ; 渡辺, 弘明 ; 永井, 香織 ; 池田, 頼正 ; 佐藤, 一博 ; 瀬川, 宏美 ; 宮田, 浩志郎 ; Tazaki, Kazue ; Nawatani, Naoko ; Kunimine, Yukie ; Morikawa, Toshikazu ; Wakimoto, Rie ; Asada, Ryuji ; Watanabe, Hiroaki ; Nagai, Kaori ; Ikeda, Yorimasa ; Sato, Kazuhiro ; Segawa, Hiromi ; Miyata, Koshirou
出版情報: 地質学雑誌 = The Journal of the Geological Society of Japan.  108  pp.435-452,  2002-07-15.  日本地質学会 The Geological Society of Japan
URL: http://hdl.handle.net/2297/00061646
概要: 金沢大学理工研究域地球社会基盤学系<br />1991年12月,排砂ゲートを設けた出し平ダム(富山県黒部川水系1985年設立)から,初の直接排砂が行われ,その際,多量のヘドロが排出された.その後も1999年までに計8回の排砂が行われた.本研 究において,出し平ダム湖および富山湾堆積物の特性について分析を行った.その結果,特に芦野沖にヘドロが堆積していること,そして,富山湾堆積物は他の湾堆積物と比べカオリン鉱物,スメクタイトが多く,出し平ダム湖堆積物と類似した粘土鉱物組成を持つことが明らかとなった.実験より,ニジマスのエラにスメクタイトが吸着することで,エラの変形や脱水を引き起こすことが明らかとなり,また,富山湾で採取されたヒラメのエラ表面が,微細粒子で覆われているのが観察された.以上の結果と1991年から1999年の出し平ダム排砂量とヒラメの漁獲量の変遷には密接な関係が認められ,ダム湖や富山湾底質の経時変化を観察することの重要性が示された.<br />In 1985, a dam with a discharge gate was built at Dashidaira at Kurobe River, Toyama Prefecture for the first time in Japan. The dam sediments were first flushed out in December, 1991. The sediments with bad smell, such as sludge, spread all over the downstream of Kurobe River. After the first discharge of the dam sediments, benthic fishes decreased year by year in Toyama Bay. In this study, the sediments in Dashidaira Dam Reservoir and Toyama Bay were collected in 1997, 2000 and 2001. The Toyama Bay sediments which were considered to have been affected by discharged dam sediments were collected on July 20, 2000, November 19, 2000, and March 3, 2001. The sediments in the dam reservoir and the bay were studied chemically, physically and mineralogically for comparative study. The quantity of clay minerals, mainly smectite, increase toward the discharge gate at Dashidaira Dam. The distribution of clay minerals approximately corresponded to distribution of the N, C, and S concentration in Toyama Bay. XRD data show similar clay mineral components and patterns between dam sediments and suspended particles from the seabed at the offing of Kurobe River mouth. The sediments in Dashidaira Dam Reservoir and Toyama Bay contain relatively high content of kaolin minerals associated with chlorite, vermiculite, smectite, and mica clay minerals compared with sediments of the other bays. Rainbow trouts in water with smectite suspension result clearly indicated the damage to the fish. In the highest concentration of smectite (lOg/l), all 7 rainbow trouts died in five hours. The fish's gills were deformed and dehydrated, suggesting influence of smectite particles adhered to the surface of the gills. Furthermore, SEM observation and EDX analysis of the flat fish's gill in Toyama Bay clearly showed the presence of particle-like thin films with organic materials sticking on the surface. The volume of discharged sediments from Dashidaira Dam Reservoir is clearly related to the decrease of annual haul of benthic fishes in Toyama Bay within the past nine years (1991-1999). 続きを見る
10.

論文

論文
白石, 秀一 ; 高橋, 直人 ; 霜島, 康浩 ; 朝田, 隆二 ; 渡辺, 弘明 ; 田崎, 和江 ; Shiraishi, Shuichi ; Takahashi, Naoto ; Shimojima, Yasuhiro ; Asada, Ryuji ; Watanabe, Hiroaki ; Tazaki, Kazue
出版情報: 粘土科学 = Journal of the Clay Science Society of Japan.  44  pp.176-190,  2005-07-25.  日本粘土学会 The Clay Science Society of Japan
URL: http://hdl.handle.net/2297/00061658
概要: 金沢大学理工研究域地球社会基盤学系<br />Bluish green Zn-S-and yellowish brown Fe-microbial mats were found on outer surfaces of well rise r pipes on Kakuma campus of Kanazawa University, Ishikawa Prefecture. The microscopic observation and XRF chemical analysis revealed that the formative conditions of microbial mats differ in depth due to stationary and pumping groundwater levels. Bluish green microbial mats formed in 61.6-75.6 m depth were characterized by high content of Zn and S. The microbial mats mainly consist of spherical fifine particles of several Am in size. A small amount of coccoid-and bacilli-form bacteria were found in the aggregation. While, yellowish brown microbial mats formed in 30.8-61.6 m depth and were characterized by high content of Fe, Ca, P, Si and Zn. The microbial mats mainly consist of spiral materials that were metabolized from an iron oxidizing bacterium, Gallionella ferruginea. Harp-like materials metabolized from another iron oxidizing bacteria, Toxothirixspp. were also found below 56 m in depth. A large amount of coccoid-, bacilli-and filamentous-form bacteria were found in the assemblage of the metabolic materials and the number of filamentous-form bacteria increased with depth.TEM observations and FE-TEM-EDX elemental maps revealed that some spherical particles on the cell surface of bacteria in the bluish green microbial mats are rich in Zn and S stick, suggesting that Zn exist as sulfide. The other adhesion materials consisted of Fe, Si, 0, and Zn were also formed around cell wall. The bacteria inthe bluish green microbial mats might be tolerant to heavy metal Zn. 続きを見る
11.

論文

論文
田崎, 和江 ; 金沢大学理学部地球学科田崎ゼミ生調査団 ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  58  pp.357-359,  2004-11-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061662
概要: 金沢大学理工研究域地球社会基盤学系
12.

論文

論文
田崎, 和江 ; 鈴木, 祐恵 ; 藤沢, 瑛子 ; Tazaki, Kazue ; Suzuki, Sachie ; Fujisawa, Eiko
出版情報: 地球科学 = Earth Science.  63  pp.29-40,  2009-01-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061663
概要: 金沢大学理工研究域地球社会基盤学系<br />2007年12月7日7時ごろに韓国泰安半島沖10kmで香港籍タンカーの衝突事故が発生した.3つのタンクから重油と原油が12,547kl流出し海岸一帯が汚染された.万里浦海岸(Mallipo Be ach)には厚さ30cmの重油が漂着し汚染が最も深刻であった.韓国中からボランティアが集まり,干潮時に毎日6時間の浄化作業を行った.ボランテイアは政府機関のみならず会社,研究所,地域のクラブ,女性組織なども参加した.また,12月30,31日,1月3日には,カナダ,ドイツ,アメリカ,韓国から約50名の科学者や専門家が浄化計画会議をもった.被害はおよそ300億円といわれている.本研究では事故発生から1ヶ月後の2008年1月5-6日に韓国泰安半島の万里浦海岸と蟻項海岸(Euhang Beach)の汚染調査を行った.現地でのボランテイア活動の様子,大気中の芳香族炭化水素の測定,海水の水質測定,重油の化学成分,微生物による油分解実験結果について報告し,1997年1月に日本で起きたナホトカ号重油流出事故の場合と比較検討した.ナホトカ号のC重油流出量の1.7-2.0倍という韓国史上最大の事故にもかかわらず,1ヶ月弱できれいになった砂海岸の浄化作業は驚異的である.早急な浄化作業の要因を考察し,今後の課題と提言を行った.<br />The oil spill accident occurred when a Hong Kong-registered supertanker (Hebei Spirit) was rammed by a South Korean-owned barge that came unmoored from its tugboat in rough seas about 10km off Mallipo Beach at Taean Peninsula, South Korea. The 3 kinds of oil spill accidents started at 7:00 on December 7th 2007, when a tanker collided with a barge, and blackened once-scenic beach along South Korea's western coast, about 150km, southwest of Seoul. A total of 12,547kl of both heavy oil and crude oil gushed into the ocean, more than twice as much as in South Korea's previous worst spill, in 1995. Local residents worked with about 8,800 peoples of volunteers, civil servants, police officers and military personnel, were engaged in the effort to clear away oil on the region's shores. The seafood, oyster farms and tourism industries in the Taean region have been devastated. Oil blanketed the sand of Mallipo Beach and the rocks of Euhang Beach at Taean Peninsula, South Korea, were studied on January 5-6th 2008, just after one month of the accident. Residents wore overalls, used shovels, buckets, adsorption mats, tatters, oil fences, hand-made adsorption roller, heated water at 50-70℃ washing bath, and high-pressured nozzle to clean up the oil muck. The purification of oil on the sand beach was made so quickly within one month in sandy Mallipo Beach, whereas abundant oil drops between rocks with oil slick on the seawater surface on the rocky beach in Euhang Beach still remain. The oilcontaminated hazard map by Marine Environmental Risk Assessment Research Division, Korea Ocean Research and Development Institute, Korea, reported on December 18-19th 2007. In this study, on-site surveys for checking and observing the oiling condition have started on January 5-6th 2008 one month after the spill at Mallipo Beach and Euhang Beach. The values of pH and EC in two places indicated that the bioremediation process of oil took place under neutral conditions. The analytical data of volatile aromatic hydrocarbon concentrations for 0.5l/min at two beaches indicated that the concentration of toluene is quite higher in the atmosphere than that of C typed heavy oil from the Nakhodka tanker in January 1997 in Japan. In particular, toluene concentrations were unbelievably 100-1000 times higher than those in the Nakhodka tanker accident in Japan. They succeed to cleanup beach within one month by volunteer works of manpower, and keep the clean beautiful seashore. Furthermore, we must find new defensive measure systems which are safe, low cost, easy, and sustainable by using local natural materials without manmade chemical substances. It is right time to act locally in Asian countries and think globally about environmental seawater. 続きを見る
13.

論文

論文
田崎, 和江 ; 中西, 孝 ; 横山, 明彦 ; Tazaki, Kazue ; Nakanishi, Takashi ; Yokoyama, Akihiko
出版情報: 地球科学 = Earth Science.  62  pp.367-368,  2008-09-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061664
概要: 金沢大学理工研究域地球社会基盤学系
14.

論文

論文
高橋, 直人 ; 田崎, 和江 ; Takahashi, Naoto ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  61  pp.293-300,  2007-07-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061667
概要: 金沢大学理工研究域地球社会基盤学系<br />金沢大学角間2号井戸(深度150m,取水区間深度62〜73m,同78.5〜95m,同106〜138m)では,これまで地下水位・地下水温・電気伝導度の自動観測を行っており, 2007年3月25日に 発生した能登半島地震前後における10分間隔の詳細な経時変動データを取得することができた.地下水位は,揚水ポンプの停止時に深度31m,稼動時には深度39m程度の値を示した.電気伝導度は,ポンプの停止時に18.2mS/m,稼動時には18.7mS/mの値を示した.季節変動として,夏〜秋にわずかに高く,冬〜春にかけて低くなる現象が見られている.地下水位および電気伝導度については,地震の前後で異常な水位変動は見られなかった.地下水温は,地震時直近のポンプの停止時に12.3℃,稼動時に12.6℃の値を示した.通常地下水温は夏に低く,冬に高い傾向が見られているが,能登半島地震の前約2週間の間,地下水温が約0.5℃高い傾向が継続する現象が見られた.この傾向はポンプの稼動・停止や,気温,通年の季節変動傾向などとは異なるパターンの変動であった.今後は,より震央に近い地域における地下水位・水温・水質の観測記録との照合や,余震にともなう変化の観察などの再検証が必要であるものと考える.<br />The effect on groundwater in Kakuma-No.2-well at Kanazawa University by the Noto Hanto Earthquake struck at 9:41 a.m. 25th March 2007, reported in this study. The groundwater level indicated 39m in depth during operation, whereas the level indicated 31m in depth without operation. The electric conductivity (EC) of the groundwater during operation showed 18.7mS/m, whereas the EC showed 18.2mS/m without operation, using automatic measurement system. The EC tend to be higher in summer-autumn than that of winter-spring, which had not changed the value before and after the earthquake. On the other hand, the groundwater temperature showed 12.6℃ during operation whereas the temperature showed 12.3℃ without operation. The temperature clearly increased 0.5℃ for 2 weeks before the earthquake, and decreased the temperature after the earthquake. The results suggest that the earthquake gave the effect on the groundwater temperature as well. We need comparison with the record collected from the nearest area of epicenter in our future work. 続きを見る
15.

論文

論文
今井, 茂雄 ; 北川, 陽 ; 田崎, 和江 ; Imai, Shigeo ; Kitagawa, Yo ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  56  pp.153-163,  2002-05-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061668
概要: 金沢大学理工研究域地球社会基盤学系<br />日本の九州の南に位置する沖永良部島は,石灰岩からなるため地下水による沈殿物の形成が速い.島内では,こうしたCa濃度の高い地下水を飲料水として使っているため,水洗用便器や水道管が沈殿物で閉塞する問 題を引き起こす.本研究では,知名町の水洗便器と赤嶺地区の上水ポンプ場の配管の2ヵ所で沈殿物を採取した.2つの沈殿物には,繊維状のシアノバクテリアが認められた.また,これらの沈殿物はカルサイトが主成分であり,水道水中から濃集したCu, Zn, Mn, Fe, Pbなどの重金属を含有していた.EPMA分析によって,PとNの濃集部位と重金属の濃集層とが一致していることが観察された.これら沈殿物の分析から,炭酸塩形成に適した生物化学的条件となっていたと解釈できる.われわれの生活環境の中で,設備に付着するこうした沈殿物は,汚れとして問題視される.しかしながら,こうした環境で微生物が水道水中の重金属を濃集することが示唆された.<br />Precipitates grow rapidly from underground water in limestone terrain of Okinoerabu Island located southern Kyusyu, Japan. In this island, Ca-rich underground water are used as drinking water which cause and effect choking toilet bowl and water pipes by the precipitates. In this study the precipitates were collected from toilet bowl at China-cho and from the water pipe of pump well at Akamine. Filamentous cyanobacteria are observed on the surface of the precipitates in both cases. These precipitates consist mainly of calcite with heavy metals, such as Cu, Zn, Mn, Fe and Pb which are concentrated from water. The accumulation of P and N are also detected at heavy metal layers by using EPMA. The precipitates can explain that biochemical conditions are favorable for carbonate formation. In human daily life the precipitates adhered to equipments are displeased as a dirt. However in this environments, the results suggest that microorganism can accumulate heavy metals from drinking water. 続きを見る
16.

論文

論文
脇元, 理恵 ; 田崎, 和江 ; Wakimoto, Rie ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  60  pp.275-286,  2006-07-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061669
概要: 金沢大学理工研究域地球社会基盤学系<br />新潟県月岡温泉は,原油と共に噴出したpH7.3,Eh-184mV,49.2℃の化石海水型の温泉で,その源泉井戸には黒色の原油と緑色バイオマットが存在する.このバイオマット中には糸状細菌および球菌 が存在し,銅藍(covellite; CuS)の鉱物化が認められた.銅藍の構成元素であるCuは原油に由来している.SEM観察により,油滴表面での糸状細菌のコロニー形成および溶菌作用によるバイオフィルムの形成が認められ,さらに,その表面に銅藍の結晶化が認められた.微生物の培養実験により,バイオマット中には石油分解菌である糸状細菌と硫酸還元菌である球菌が同定された.さらに,有機結合およびリン脂質分析により,バイオマット中のリン脂質,特に,界面活性作用を持つレシチンおよびリン酸エステルの存在が明らかになった.また,糸状細菌は二重膜および細胞外多糖類(EPS)を持ち,リン脂質はこの部分に含まれると考えられる.糸状細菌はバイオマット表面に付着した油滴を栄養源とし,球菌が生成した硫酸塩を電子授与体として代謝を行い,溶菌後,バイオフィルムを形成する.油滴中のCuは温泉水中に溶出し,中性で還元的な環境下において銅藍の結晶を形成する.すなわち,本研究において,石油分解菌の細胞膜およびEPSの有機界面活性作用と硫酸還元菌による水質の還元化が,油滴表面での銅藍の形成に重要な役割を果たしていることが明らかになった.この結果は,土壌および地下水圏の石油汚染地域における石油の分解・除去メカニズムの解明の糸口となると考えられる.<br />The inner wall of the Tsukioka hot spring well was covered with green microbial mats which contained black crude oil. The hot spring is located in Tsukioka, Niigata, Japan. The hot spring water (pH 7.3, Eh -184 mV and 49.2℃) that was produced from a 280m in depth originated from fossil seawater. The aim of this study was to investigate of covellite biomineralization in the green microbial mats with crude oil from the Tsukioka hot spring water. Observations by optical and electron microscopy, phospholipid analysis and bacterial cultivation showed that the biomineralization of covellite (CuS) was found on the surface of crude oil droplets. ED-XRF analysis showed that the crude oil contained SO3 (67.6wt%), CaO (24.8wt%) and Cu2O (2.6wt%). Observations by optical and epifluorescence microscopy as well as scanning electron microscopy (SEM) showed that two morphological types of bacteria (i.e., filamentous and coccus typed bacteria) were found on crude oil droplets. Transmission electron microscopic (TEM) observations further revealed that the cell wall of the filamentous bacteria had a double membrane and was surrounded by Extracellular Polymeric Substance (EPS), which might provide the favorable nucleation sites for CuS. X-ray diffraction and electron diffraction analyses of the microbial mats showed that the materials precipitated on the surface of the oil droplets were highly crystallized covellite (CuS). FT-IR spectra of the microbial mats that contained covellite showed the appearance of C-N-H, P=O, P-O-C and N-H bands, indicating the presence of phospholipids (lecithin and phosphoric ester) in the microbial mats. Cultivation experiments, furthermore, demonstrated that the cultivated bacteria were identified as sulfate reducing bacteria (for coccus typed bacteria) and oil decomposing bacteria (for filamentous bacteria). A schematic formation model is here suggested to better understand the interaction between bacterial cells and oil droplets under anaerobic conditions in the Tsukioka hot spring water. The biomineralization of covellite described in this study might have profound implications for bioremediation of oilcontaminated site. 続きを見る
17.

論文

論文
三津野, 真澄 ; 渡辺, 弘明 ; 田崎, 和江 ; 長沼, 毅 ; Mitsuno, Masumi ; Watanabe, Hiroaki ; Tazaki, Kazue ; Naganuma, Takeshi
出版情報: 地球科学 = Earth Science.  54  pp.184-190,  2000-05-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061670
概要: 金沢大学理工研究域地球社会基盤学系
18.

論文

論文
児玉, 一八 ; 田崎, 和江 ; Kodama, Kazuya ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  63  pp.107-112,  2009-03-25. 
URL: http://hdl.handle.net/2297/00061672
概要: 金沢大学理工研究域地球社会基盤学系<br />In the past 55 years no floods have occurred in Asanogawa River which has no dam. Early on the mo rning of July 28th, 2008, localized torrential rain in the area around Asanogawa River in Kanazawa City, Japan, brought inundations, flooding homes, causing landslides, and leaving serious damage. In the upper stream, two houses were destroyed completely by flooding and landslides. The muddy flood water flowed into fields and rice paddies, fruit trees were washed down, and the rice was killed. In several areas where the river narrowed, or at bends, flood waters overflowed the dike. Because of delays in closing the floodgate, the river overflowed at opening in the dike called "Kirikaki". 続きを見る
19.

論文

論文
田崎, 和江 ; 中西, 孝 ; 鈴木, 祐恵 ; 佐藤, 和也 ; 森井, 一誠 ; 鈴木, 健之 ; Tazaki, Kazue ; Nakanishi, Takashi ; Suzuki, Sachie ; Satoh, Kazuya ; Morii, Issei ; Suzuki, Kenji
出版情報: 地球科学 = Earth Science.  61  pp.343-361,  2007-09-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061673
概要: 金沢大学理工研究域地球社会基盤学系<br />2007年3月25日9時41分にマグニチュウド6.9の激震が石川県能登半島を襲い,舗装道路に大きなダメージを与え,交通網が寸断された.本研究調査団はGMサーベーメータを使用し,車によるカーボーン 法と徒歩によるハンドボーン法の併用により,能登半島地震災害地の空間β線と舗装道路の亀裂,陥没,隆起,地滑り地帯におけるβ線を測定した.測定日は2007年4月4日から19日の間の4回であり,約240kmの距離を2-4台のGMサーベーメータで,毎回同じルートを往復して測定した.また,地震の被害がなかった金沢市内においても4月12日に測定を行い,災害地と比較した.2007年4月4日8:20に輪島市大沢において2300cpmを記録し,同日の13:20には古和秀水にて1500cpmを記録した.これはともにM3.8,深さ10km,震源地37.2N,136.7E,およびM3.3,比較的浅い震源37.2N,136.5Eの余震に合致した,舗装道路の亀裂,陥没,隆起,液状化の箇所は100-200cpmと高い値を示し,かつ,その場の大気はそれ以下であった.一方,地震被害のなかった金沢市内は40-80cpmと低い値を示した.空間β線計数率分布地図は地震の被害が大きい地域で高く,時間が経過するに従い低下することが明らかになった.<br />The magnitude-6.9 Noto Hanto Earthquake struck at 9 : 41 a.m. 25th March 2007, off the north coast of Ishikawa Prefecture, Japan. The quake started under the ocean about 30km southwest of Wajima, shaking up Ishikawa, Toyama and Niigata prefectures and killing one person and damaging hundreds of houses. The quake crippled public transportation, traffic network, including highway at Noto Peninsula, because of landslide, subsidence, chasm and cracks. Radon has measured in air and ground fissures using portable natural gamma ray system while the Noto Hanto Earthquake struck the Noto Peninsula, in April 4, 8, 10, 12, and 19th 2007. The car-borne and hand-borne measurement system was assembled for easily and rapidly detecting full features of the fissures buried in the ground, and the applicability of the system was detected in the field, such as geological feature, fault fissure zone, distribution/accumulation of new/old chasm and cracks in the surface layer, and direct earthquake itself. The amount of radon reflects the scale of fissures and an abnormal increase in earthquake and new chasm or cracks. The quite high gammaray of 2300cpm was detected in April 4th 8 : 20 at Ozawa, Monzen, Wazima City, near the fault fissure zone, and 1500cpm was detected in April 4th 13 : 20 at Kowashudo, Monzen, Wajima City. Both high radon counts were due to the earthquake of M 3.8, depth 10km, hypocenter was Noto region 37.2N, 136.7E, and the other earthquake of M 3.3 was relatively shallow depth, hypocenter at Noto offshore 37.2N, 136.5E, respectively. The abnormal increase (100-200cpm) detected at large deep subsidence and new crack on the paved road. For comparison, normal air radon without earthquake counted as low as 40-80cpm. Observation of radon at earthquake region such as Monzen-cho related to radon anomaly to compare with other normal region in Kanazawa City has been studied. 続きを見る
20.

論文

論文
小林, 昭二 ; 田崎, 和江 ; Kobayashi, Shoji ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  60  pp.49-62,  2006-01-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061674
概要: 金沢大学理工研究域地球社会基盤学系<br />系統的にDusisiren jordaniとHydrodamalis gigasの間にあるヤマガタダイカイギュウD. dewana,アイヅタカサトカイギュウD. takasatensis,タキカ ワカイギュウH. spissa等をふくむヒドロダマリス亜科の下顎(咀嚼),頭の背屈・側屈,脊柱運動機能の変化について,骨格の観察と現生の海牛(ジュゴンとマナティー)の筋学的な知見をもとに考察を試み,次の結果を得た.1)後期中新世のD. takasatensisとD. dewanaでは歯が小さくなった後,翼状突起腹側部が広がり,下顎骨の吻部咀嚼面が狭い長方形となることから下顎骨を動かし吻部で餌をはさむ力が増したと考えられる.歯を欠如した鮮新世のH. spissaではそれがさらに強くなったと推測される.また側頭稜の発達から鮮新世のH. cuestae, H. spissaでは側頭筋の力が現世のH. gigas以上に強いと考えられる.2)鱗状骨外側部,上後頭骨・外後頭骨背外側縁の形状比較から,後期中新世のD. jordaniのように板状筋が発達する傾向はD. takasatensis, D. dewanaにも認められる.しかし,H. gigasのように板状筋より頭半棘筋の発達が目立つのはすでにH. spissaから認められる.3) D. dewanaとD. takasatensisはほぼ同じ大きさの頭蓋をもつが,鱗状骨外側部,上後頭骨・外後頭骨背外側縁の形状の差異から,D. takasatensisが頭の背屈・側屈がより強く,頭の可動範囲も広いと考えられる.4)ヒドロダマリス亜科は中位胸椎の棘突起が低いことから,最長筋などの軸上筋の発達が弱く,脊柱を背屈させる力もジュゴンの場合より弱い,特にH. spissaで顕著であると考えられる.ヒドロダマリス亜科は水流エネルギーのあまり強くない環境に穏やかな脊柱の動きで生息していたと推測できる.<br />Evolutional change in function of the jaw, mobility of the neck and the vertebral column in Hydrodamalinae is examined on the basis of the fossil skeleton, the myological and osteological knowledge of living sirenians. In Dusisiren dewana, Dusisiren takasatensis and Hydrodamalis spissa, the holding function of their rostra probably had been developed like Hydrodamalis gigas, because they had a mandibular masticating surface which is narrow and rectangular in outline, ventrally broadened pterygoid process that attached the pterygoid muscles. In D. dewana and D. takasatensis, the splenius muscles may have been developed like Dusisiren jordani, but in H. spissa, the semispinalis capitis muscle may have been more developed than the splenius muscle like H. gigas. D. takasatensis has some other features, longer sigmoid ridge of squamosal, larger occipital condyle and occipitosphenoidal eminence, and thicker lateral flange of exoccipital than those of D. dewana. Therefore, there is a possibility that in D. takasatensis the neck force for raising and depressing the head had been strengthened by the developed splenius, semispinalis capitis and longus capitis muscles. The low spinous process of the middle part of the thoracic vertebrae in Hydrodamalinae indicates that the epaxial muscles (longissimus dorsi and transversospinalis muscles) are less developed, and therefore that the mobilities of the vertebral column are gentle. They might have been swimming in the calm environment. 続きを見る
21.

論文

論文
脇元, 理恵 ; 田崎, 和江 ; 縄谷, 奈緒子 ; 池田, 頼正 ; 今井, 茂雄 ; 佐藤, 一博 ; 奥野, 正幸 ; Wakimoto, Rie ; Tazaki, Kazue ; Nawatani, Naoko ; Ikeda, Yorimasa ; Imai, Shigeo ; Sato, Kazuhiro ; Okuno, Masayuki
出版情報: 地球科学 = Earth Science.  58  pp.199-214,  2004-07-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061675
概要: 金沢大学理工研究域地球社会基盤学系<br />大島紬は使用する泥田の状態により,染色の仕上りが異なると言われている.本研究では,現在使用中の泥田,現在は使われていない旧泥田,来期使用のために一年間休閑中の泥田の泥について鉱物学的,微生物学的 特徴を検討した.3つの泥田のEh,DOは,ともに休閑中の田で最も還元状態を示した.泥の中には石英,長石類の他に鉄酸化物や鉄に富むクロライト,バーミキュライト,雲母類粘土鉱物,カオリン鉱物などの粘土鉱物が確認された.一年休閑させている泥田の泥と現在使用中の泥田の泥の総Fe量はともに多く,鉄酸化物や粘土鉱物中に含まれている.一方,有機成分は,現在使用中の泥田で最も高く,この結果は光学顕微鏡観察および偏性嫌気性細菌培養により,多種多様の微生物が観察された事と一致する.また,偏性嫌気性細菌培養結果は,特に鉄還元細菌と考えられる球菌,桿菌が多いことを示した.泥により黒く染色された絹糸部分からは,Fe,S,Ca,Al,Si,P,K,Mnが検出され,これらの元素は,泥およびテーチ木起源と考えられる.よって,大島紬を独特の深い黒色に染色する泥田の条件として,泥田の水質が還元状態である事,染色に重要な鉄は二価鉄である事,泥中には鉄還元細菌をはじめとする多種多様の微生物が存在し,鉄を二価に変えている事があげられる.<br />"Dorozome" is one of the traditional dying methods with muddy clays in Amami-Ohshima Island, Kagoshima, Japan. The brilliant black color of dyed "Ohshima Tsumugi" derives from muddy clays in Dorota (small ponds with muddy clays). In this paper, muddy clays for dying were mineralogically, chemically and microbiologically characterized. The muddy clays consist of Fe-rich chlorite, vermiculite, mica clay minerals, kaolin minerals as well as a large amount of iron hydroxides associated with high P2O5, N, C and S contents in the muddy field. Principally, iron is a key element which constitutes not only crystalline/amorphous hydroxides iron minerals, but also clay minerals. After one year of using the muddy clays, the Eh and DO are significantly reduced in fallow field. Various microorganisms were observed in the muddy clays, such as coccus and bacillus typed bacteria and fungi. Anaerobic bacteria may contribute for reducing condition in the muddy field. The black parts of "Ohshima Tsumugi" contain high concentrations of S, Ca and Fe, whereas white parts without dye contain a small amount of such elements. The heavy metals are originated from both muddy clays and Rhaphiolepis umbellata. The results suggest that specific condition of iron hydroxides is an important factor for brilliant black dye under reducing condition. 続きを見る
22.

論文

論文
佐藤, 大介 ; 田崎, 和江 ; Sato, Daisuke ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  54  pp.328-336,  2000-09-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061676
概要: 金沢大学理工研究域地球社会基盤学系<br />尾小屋鉱山の坑口(第六立坑)からは,現在も高濃度の重金属を含む酸性の廃水(pH3.5)が流出し続けており,消石灰の投入による中和凝集沈殿処理が行われている.処理後の廃水が流入する沈殿池から採取し たコアサンプル(44層)の鉱物組成をX線粉末回折(XRD)によって,また含有元素の割合をエネルギー分散型蛍光X線分析(ED-XRF),NCSコーダーによって分析した.コアサンプルの上部には茶褐色の層が多く,下層になるにつれて色は薄れていく.茶褐色は含有するFeの量により,それらは低結晶性の水酸化鉄鉱物の存在を示唆し,Cu,ZnおよびPbが吸着していると考えられる.また,Sの含有量は深層になるに従って多くなる.カルサイトはコアの上層部に多く,下層部にはエトリンガイトが形成されているが,Cdの含有量はカルサイトやエトリンガイトと同じようなプロファイルを示す.その他,堆積物中には,ジプサム,石英,ブルーサイトが認められた.Caは上層部ではカルサイトとして,また,下層部ではエトリンガイトとして堆積している.本研究により,消石灰の投入によって中和処理された鉱山廃水中の重金属イオンは,水酸化鉄,カルサイト,エトリンガイトに伴って堆積,蓄積されていることが明らかになった.<br />Depositional formula of heavy metals after disposal of the mine drainage from the Ogoya Mine in Ishikawa Prefecture, Japan, was mineralogically investigated. Strong acidic wastewater (pH3.5) from pithead of the mine contains high concentration of heavy metals. In this mine, neutralizing coagulation treatment is going on by slaked lime (calcium hydroxides: Ca (OH)_2). Core samples were collected at disposal pond to which the treated wastewater flows. The core samples were divided into 44 layers based on the color variation. The mineralogical and chemical compositions of each layer were analyzed by an X-ray powder diffractometer (XRD), an energy dispersive X-ray fluorescence analyzer (ED-XRF) and a NCS elemental analyzer. The upper parts are rich in brown colored layers, whereas discolored are the deeper parts. The color variation is relevant to Fe concentration. Brown colored core sections are composed of abundant hydrous ferric oxides with heavy metals, such as Cu, Zn, and Cd. On the other hand, S concentration gradually increases with depth. XRD data indicated that calcite decreases with increasing depth, and ettringite is produced at the deeper parts. Cd concentration shows similar vertical profile to those of calcite and ettringite. The results revealed that hydrous ferric oxides, calcite and ettringite are formed on deposition, whereby incorporating the heavy metals. 続きを見る
23.

論文

論文
大野, 源広 ; 田崎, 和江 ; Ohno, Motohiro ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  54  pp.298-309,  2000-09-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061682
概要: 金沢大学理工研究域地球社会基盤学系<br />高温環境である平湯温泉,おばこ原の湯には3種のバイオマット(白色,茶色,緑色)が存在する.これらのバイオマットは水温,pH,Eh,DO,光および温泉水の流れの変化に伴い,上流部から下流部に向かっ て色調が白色→茶色→緑色へと変化する.白色バイオマットは主として大鎌型細菌から構成され,硫黄を濃集するのに対し,茶色バイオマットは多量の桿菌および少量の糸状菌で構成され,水酸化鉄を濃集する.また,緑色バイオマットは糸状菌から構成され,カルシウムを濃集し,方解石を形成する.すなわち,バイオマットの色は生息する微生物種と形成された生体鉱物を反映している.その中でも高温環境下に存在する大鎌型細菌は夾膜の表面に雁行状に硫黄の結晶を成長させる特徴がある.<br />Colorful biomats were found at Obakoharanoyu in Hirayu Hot Springs, Gifu, Japan. At the upper stream white biomats were commonly found, whereas brown and green biomats occur at the down stream, according to change of environmental conditions, such as temperature, pH, Eh, DO, S2-, photosynthesis and water flow velocities. The pH, WT, Eh, and DO diagrams of the hot spring water from upper to down stream have responded to the occurrence of biomats. White biomats occur in low pH (6.1), reducing (Eh:-270mV), micro-aerobic (DO: 0.3mg/l) and high temperature (70℃) conditions. On the other hand, brown biomats occur in wide ranges of pH (6.5-7.8), Eh (-125〜90mV), DO (2.0〜5.0mg/l) and WT (42-60℃) respectively. In contrast, the occurrence of green biomats are high pH (8.4), oxidizing (Eh: 100mV), aerobic (DO: 7.5mg/l) and middle temperature (30℃). Sulfur ions are detected in water on the white biomats (1-2ppm), while not detected from both brown and green biomats. The white biomats comprising sausage shaped bacteria contain abundant sulfur. The green biomats consist of filamentous bacteria with abundant calcite. The results have revealed that the color of biomats reflects the environmental conditions. TEM and SEM observations indicate that sulfur particles adhere to capsule on the cell wall of sausage shaped bacteria in white biomats. The sulfur particles might be grown to a-sulfur crystals of 10μm insize. The results have revealed that sulfur-biomineralization of sausage shaped bacteria in white biomats is a very important factor for sulfur removal in hot springs. 続きを見る
24.

論文

論文
田崎, 和江 ; Tazaki, Kazue
出版情報: 地球科学 = Earth Science.  61  pp.239-242,  2007-07-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061683
概要: 金沢大学理工研究域地球社会基盤学系
25.

論文

論文
田崎, 和江 ; 野村, 正純 ; 森井, 一誠 ; 佐藤, 和也 ; 馬場, 奈緒子 ; 中西, 孝 ; 横山, 明彦 ; Chaerun, Siti Khodijah ; Tazaki, Kazue ; Nomura, Masazumi ; Morii, Issei ; Satoh, Kazuya ; Baba, Naoko ; Nakanishi, Takashi ; Yokoyama, Akihiko
出版情報: 地球科学 = Earth Science.  62  pp.325-330,  2008-09-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061687
概要: 金沢大学理工研究域地球社会基盤学系<br />The magnitude-6.8 Chuetsu-Oki Earthquake struck at 10:13 a.m. 16th July 2007, off the northwester n coast of Japan in Niigata Prefecture, Japan. The hypocenter was Chuetsu-Oki region 37.33N, 138.36E (17km in depth). The quake started under the ocean about 9km North of Kashiwazaki Kariwa nuclear plant, killing 11 peoples, and flattening several hundreds of buildings. In this study, Radon has measured in air and ground fissures using portable natural gamma ray system on July 16-17, and 20-21th, 2007. The quite high gamma ray of 300-340 cpm was detected on July 21th at Ohminato, Kariwa village which is the nearest of the fault fissure zone. The abnormal increase (200-300cpm) was detected at large deep subsidence and new crack on the paved road. For comparison, normal air radon without earthquake was counted as low as 60-80cpm. The car-borne and hand-borne measurement system was assembled for easily and rapidly detecting full features of the fissures buried in the ground. 続きを見る
26.

論文

論文
田崎, 和江 ; 野村, 正純 ; 馬場, 奈緒子 ; Tazaki, Kazue ; Nomura, Masazumi ; Baba, Naoko
出版情報: 地球科学 = Earth Science.  61  pp.389-400,  2007-09-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061691
概要: 金沢大学理工研究域地球社会基盤学系<br />2007年3月25日9時41分にマグニチュード6.9の地震が石川県能登半島を襲った.その地震のため1〜2週間電気や水道が止まった.住民は近所の井戸,湧き水,山水を注意深く使用した.なぜならば,地 震後のそれらの水は,泥などで色が変化し,pHも硫酸イオンのために中性から酸性に変化し飲料不可になった井戸水があったからである.一方,地震から2ヶ月後の6月初旬,石川県七尾市中島町において、亀裂や陥没等々の地下構造の変化のため,海水が水田に浸透し稲が枯れる塩害が発生した.塩害が発生した水田を始め,周辺の用水路,貯水池の水を現地で測定したところ,pH8を示し電気伝導度(EC)も高い値を示した.また,塩害を起こした水田の土壌と稲を蛍光X線分析により定量分析をおこなったところ高濃度の塩素のほか典型的な塩害現象を示すNa,S,Feが高濃度に検出された.<br />The Noto Hanto Earthquake with a magnitude of 6.9 struck off the North coast of Ishikawa Prefecture that occurred at 9 : 41 a.m. on the 25th March 2007. It was an undersea earthquake with an epicentre of about 30km Southwest of Wajima, shaking up the Hokuriku district and cutting electricity and drinking water system for 1-2 weeks. All residents, especially those who are near the hardest hit areas, were advised to use drinking water collected from springs, wells and mountain natural waters with extra caution, because the water had become muddy after the quake. Some of waters were shifted from neutral to acidic pH (pH 5) that was not drinkable due to SO4_2- On the other hand, the rice fields were also damaged by sea salt after 2 months of the earthquake, because of several factors to consider, such as cracks, faults, and subsidence near reservoir water for rice field irrigation at Nakajima-machi, Nanao City, Ishikawa Prefecture at the beginning of June 2007. The field measurements of the pH of the water (pH 8) and high electrical conductivity (EC) suggest that seawater flowed into the rice fields, which agreed with X-ray Fluorescence quantitative analysis, showing high chlorine content. The soil and rice at damaged fields indicated high Na, S, Cl, and Fe contents, showing typical phenomenon of sea-salt damage. Farmers have asked the government for compensation and prevention of the damaged rice fields even after 2-3 months of the earthquake. 続きを見る
27.

論文

論文
田崎, 和江 ; 馬場, 奈緒子 ; 佐藤, 和也 ; 奥野, 正幸 ; 福士, 圭介 ; Tazaki, Kazue ; Baba, Naoko ; Satoh, Kazuya ; Okuno, Masayuki ; Fukushi, Keisuke
出版情報: 地球科学 = Earth Science.  61  pp.281-292,  2007-07-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061692
概要: 金沢大学理工研究域地球社会基盤学系<br />2007年3月25日9時41分にマグニチュード6.9の地震が石川県能登半島を襲った.その折,水道が断水し,住民は周囲の井戸水,湧き水,山水を生活水として使用した.その水は地震直後から白色,灰色, 茶色に濁り,2-3日から2週間続いた.本研究は被害地の住民からの聞き取り調査,現地における水質検査,採水試料を実験室に持ち帰り,蛍光X線分析,イオンクロマト分析,走査型電子顕微鏡観察を行った.地震前は中性であった井戸水が地震後にpH5.4-5.9と酸性になり,かつ, SO4が非常に高くなり飲料不可となった.一方,中性であった温泉水がpH8とアルカリ性に変化し, NaCl含有量が高くなり,海水の浸入を示唆した.また,飲料水の6項目についての検査を行政に依頼したところ, 2箇所の水から基準以上の一般細菌と大腸菌が見つかり飲料不可となった.なお,この検査項目にはpHが含まれていないので,今後,災害時にはいち早く生活水についてpHや集落形成単位(CFU)を含めた水質検査が必要である.さらに,避難所における生活水はノロウィルスなどによる病気と直結しているため,行政による迅速な措置と指導が必要である.<br />The magnitude-6.9 Noto Hanto Earthquake struck at 9:41 a.m. 25th March 2007, off the north coast of Ishikawa Prefecture. The quake started under the ocean about 30 km southwest of Wajima, shaking up Ishikawa, Toyama and Niigata prefectures and cutting electricity and drinking water system to some 160,000 households, killing one person and damaging hundreds of houses. The quake also crippled public transportation, including Noto airport, and cut water to about 9,500 households. All residents, especially those who are near the hardest-hit area, are advised to use drinking water collected from spring, well and mountain natural water with extra caution, because the water got become muddy in white, gray, and brown color after the quake. Some of water changed to acidic pH 5.4-5.9 from neutral pH is not drinkable due to SO4. The legal standard of pH for drinking water is pH 5.8-8.6. The water contained 5-10 times of SO4 higher than standard concentration of SO4, but looking transparent after one week. The field measurements of water pH suggest that high SO4 contents are due to acidic drinking water, agreed with XRF, ion-chromatography, and SEM-EDX analyses. After 3 weeks, water pH 5.9 backed to the normal pH 6.5, but NO3, Ca and Mg contents were still higher than before the quake. We have ordered the government to work, toward securing the citizen's safety and take all possible measures of drinking water to rescue them. The health center office must take care of spring water, well, and mountain natural water to check pH as soon as possible associated with CPU (Colony Forming Unit) check. 続きを見る
28.

論文

論文
田崎, 和江 ; 山内 , 順公 ; 犬飼, 将成 ; 中山, 和正 ; 犬塚, 俊裕 ; 森井, 一誠 ; 片桐, 有由未 ; 糸野, 妙子 ; Tazaki, Kazue ; Yamauchi, Yoritaka ; Inukai, Masanari ; Nakayama, Kazumasa ; Inuzuka, Toshihiro ; Morii, Issei ; Katagiri, Ayumi ; Itono, Taeko
出版情報: 地球科学 = Earth Science.  58  pp.389-405,  2004-11-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061693
概要: 金沢大学理工研究域地球社会基盤学系<br />雨水が樹冠を通過することにより水質がどのように変化するのかを明らかにするため,スギ,コナラ,モウソウチタの林外雨,林内雨および樹幹流の水質測定と溶存イオンをED-XRFにより分析した.雨水の採取 や測定は2004年2-3月金沢大学角間キャンパスで行った.また,雨水が森林の樹木を伝わり土壌に行く物質循環を明らかにするため,スギ,コナラ,モウソウチクの樹皮の浸出実験と土壌の透過実験を行った.その結果,スギ,コナラの樹皮の浸出液のpHは酸性化し,モウソウチクは弱酸性化した.このpHの変化は溶出したK,Caなどのイオンによって生じる.樹皮の浸出実験の前と後をSEM-EDXで観察したところ,浸出後の表面は平滑になっていた.また,3種の樹木の樹幹流を土壌に透過させるとpHは4-6の一定の値に収束した.これは土壌中に存在する粘土鉱物のイオン交換能を示唆している.さらに,土壌は植生によって溶脱するイオンの種類と量が異なる.以上の結果は,雨水が樹幹を伝わることにより大きく水質および化学成分を変化させることを明らかにした.この結果は森林環境保全を行う上で重要である.<br />Field and laboratory studies were conducted to investigate the successive changes in the chemical and physical characteristics of rainwater through stemflow as well as soil in three different forest ecosystems. That is, Sugi (Cryptomeria japonica), Konara (Quercus serrata), and Mousoutiku (Phyllostachys heterocycla) forests which are located in the Kakuma campus of Kanazawa University, Ishikawa Prefecture, Japan. Rainwater outside those forests was also sampled as control precipitation. For field investigation, the rainwater samples as throughfall and stemflow were collected from February 25 to March 18, 2004. For laboratory investigation, the batch leaching experiment using control rainwater was performed over a period of one week, and the continuous filtration experiment using downflow soil bed system with the stemflow of those trees was undertaken as well. XRD analyses of bulk soil and < 2 μ m fraction of soil samples collected from those forests showed similar mineral compositions composed of quartz, feldspars, cristobalite, gibbsite, chlorite, vermiculite, and kaolin minerals. The leaching experimental data showed similar mineral decreases in the rainwater pH of Sugi forest (pH〜4), while little change in the rainwater pH of Konara forest was observed. Conversely, the rainwater pH of Mousoutiku forest tended to increase. These pH changes may be the result of dissolution of K and Ca contained in the bark of those trees in agreement with the experimental data of chemical composition of rainwater analyzed by ED-XRF. Scanning electron microscopic observations of tree bark showed that the surfaces of bark after leaching became smoother than those before leaching, and their EDX spectra showed that there were decreases in the K and Ca contents after leaching. The continuous filtration experiment demonstrated that there were significant changes in the pH, EC, and Eh of the effluent rainwater after filtering through a soil filter bed with several kinds of minerals, indicating that minerals serve as a natural buffer. These results indicate that the type of plants and mineralogical composition of soils in forest ecosystems have effects on the successive changes in the chemical and physical characteristics of rainwater. 続きを見る
29.

論文

論文
田崎, 和江 ; 長谷川, 香織 ; 松本, 和也 ; Tazaki, Kazue ; Hasegawa, Kaori ; Matsumoto, Kazuya
出版情報: 地球科学 = Earth Science.  56  pp.87-104,  2002-03-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061694
概要: 金沢大学理工研究域地球社会基盤学系<br />かつての鉱山活動は重金属を外界に排出し,今日でも水質や土壌汚染の原因となっている.岐阜県神岡町にある大規模なZn-Pb鉱山の一つである神岡鉱山は,神通川の重金属汚染源となってきた.Cd,Pb,Z nそしてFeなどの重金属が高原川-神通川水系に未処理のまま廃棄され,下流域の住民の健康に影響を与えた.重金属の中でも特にCdは,イタイイタイ病の病原物質と見なされた.Cd汚染問題は未だに解決されていない.消石灰を投入し,中和凝集処理された廃滓の沈殿池が神岡鉱山にいくつか存在する.廃滓や廃棄場から排出された汚染水は,神通川の上流の高原川に流れ込んでいる.本研究では,重金属を含む堆積物の特性を明らかにするため,高原川-神通川水系にある五つのダムの堆積物を採取した.ダム堆積物の鉱物的・化学的組成を明らかにするため,それぞれの試料についてXRD,ED-XRFによる分析を行った.その結果,神岡鉱山の上流域に位置する浅井田ダムの堆積物はCd,粘土鉱物そして有機物が少なく,神岡鉱山の下流域に位置する新猪谷ダム,神通川第一,第二,第三ダムにおいては,汚泥,スメクタイトそしてZn,Cdのような重金属が多く含まれていることが明らかになった.また,本研究では,水中の重金属の浄化能力を見積もるための実験を行った.その結果,バクテリアを使ったバイオレメディエーションは重金属の固定に効果的であることを示した.室内実験系においてバイオフロック中の糸状菌は,一週間で細胞壁の表面にPb,Zn,Cdを選択的に濃集した.バイオレメディエーションの能力を持つバクテリアは,鉱山地域における下流のダム堆積物中でも重金属を固定する重要な役割を演じている.<br />Contamination of water and soils is one of grave problems at mining area. Kamioka Mine, one of the largest Zn-Pb mine in Gifu prefecture in Japan, has been the source of heavy metal pollution in Jinzu River. Cd, Pb, Zn, and Fe have been released from an abandoned dump into the Takahara-Jinzu River system, and serious health problem occurred in the down stream areas. Heavy metals, Cd, in particular, is regarded to be the pathogenic substance causing Itai-Itai Disease. The Cd pollution problems have not yet been solved. Some tailing ponds with neutralizing coagulation treatment (slaked lime) are present in the Kamioka Mine. Heavy metal-contaminated wasted water from tailing and dumping areas were discharged into the Takahara River (the upper stream of the Jinzu River). In this study, five dam sediments along the Takahara-Jinzu River were collected, in order to clarify characteristics of sediments with heavy metals. Each sample was analyzed by using an X-ray powder diffractometer (XRD) and an energy dispersive X-ray fluorescence analyzer (ED-XRF) in order to clarify the mineralogical and chemical compositions of the dam sediments. As a result, the sediment from Asaida dam on the upper course of the Kamioka Mine has little Cd, clay minerals and organic matter, whereas Shininotani dam, Jinzu 1st dam, Jinzu 2nd dam, Jinzu 3rd dam in the down stream of the Kamioka Mine have much sludge, smectite and heavy metals, such as Zn and Cd. Smectite and organic matter have been concentrated with heavy metals in the down stream dam sediments of Jinzu River. In this study, arrange of experimental observation has carried out in order to estimate the ability of heavy metals for the purification of water. The results suggest that bioremediation methods using bacteria is effective as a fixing heavy metals. Filamentous bacteria in biofloc selectively accumulated Pb, Zn, and Cd on the surface of cell wall in laboratory experimental system after one week aging. The bacteria have an ability as a bioremediation, play a key role in the fixation of heavy metals in the down stream dam sediments at mining area. 続きを見る
30.

論文

論文
田崎, 和江 ; 倉繁, 和也 ; Tazaki, Kazue ; Kurashige, Kazuya
出版情報: 地球科学 = Earth Science.  54  pp.287-297,  2000-09-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00061695
概要: 金沢大学理工研究域地球社会基盤学系<br />北陸地方では泥漬け,つまり野菜を泥でつける食文化が伝承されている.本研究では,泥漬けで用いられる泥"赤ベト"の特性および漬け込むだナスの表皮が染色するメカニズムを明らかにした.数日間,赤ベトに漬 けたナスの表皮は鮮やかなコバルトブルーになる.一般に,赤褐色の泥の化学的特性は豊富な鉄によると認識されてきた.赤ベトには,粘土鉱物の他に,石英や長石などのケイ酸塩鉱物,鉄ミョウバン,そして水酸化鉄が含まれていた.これらの鉱物の含有量は各地域の泥により変化した.蒸留水,塩酸水溶液および溶液の水質(pH, Eh,EC,そしてDO)の変化を9日間測定したところ,酸性条件下で加水分解により鉄イオンが溶出することが示された.以上の結果から,加水分解によりナスの表皮がコバルトブルーに変色する現象は,ナスの主要な色素であるanthocyanやhyacinに関係していることが示唆される.<br />Abstract"Mud-Pickles" soaking vegetables has been handed down in Hokuriku District from generation to generation. The characteristics of the mud for soaking, and the mechanisms of dyeing eggplants in "Aka-beto" were revealed in this study. The eggplant kept in "Aka-beto" for few days exhibits brilliant cobalt blue. Chemical characteristics of the reddish brown-colored mud were commonly acknowledged as abundant Fe. "Aka-beto" contains silicate minerals such as quartz, feldspars, jarosite, and hydrated iron oxides, in addition to clay minerals. The content of these minerals was varied, depending on the local mud. Values of pH, Eh, EC and DO of the mud which added to distilled water, HCl and NaCl, were measured for 9 days respectively. The results indicated that ion leaching of Fe, occurred in acidic condition, due to hydrolysis. Accordingly, it is suggested that such a hydrolysis change of the color of eggplants into cobalt blue, in association with anthocyan and hyacin, major pigments of eggplant. 続きを見る
31.

論文

論文
Hattori, Yuki ; Gabata, Toshifumi ; Matsui, Osamu ; Mochizuki, Kentaro ; Kitagawa, Hirohisa ; Kayahara, Masato ; Ohta, Tetsuo ; Nakanuma, Yasuni ; 蒲田, 敏文 ; 松井, 修 ; 北川, 裕久 ; 萱原, 正都 ; 太田, 哲生 ; 中沼, 安二
出版情報: World Journal of Gastroenterology.  15  pp.3114-3121,  2009.  Baishideng Publishing Group Co
URL: http://hdl.handle.net/2297/00061733
概要: 金沢大学医薬保健研究域医学系<br />Aim: To evaluate retrospectively the correlation between enhancement patterns on dynamic computed to mography (CT) and angiogenesis and fibrosis in pancreatic adenocarcinoma. Methods: Twenty-three patients with pancreatic adenocarcinoma underwent dynamic CT and tumor resection. In addition to the absolute and relative enhanced value that was calculated by subtracting the attenuation value on pre-contrast from those on contrast-enhanced CT in each phase, we defined one parameter, "tumor-aorta enhancement ratio", which was calculated by dividing enhancement of pancreatic cancer by enhancement of abdominal aorta in each phase. These enhancement patterns were correlated with the level of vascular endothelial growth factor (VEGF), microvessel density (MVD), and extent of fibrosis. Results: The absolute enhanced value in the arterial phase correlated with the level of VEGF and MVD (P = 0.047, P = 0.001). The relative enhanced value in arterial phase and tumor-aorta enhancement ratio (arterial) correlated with MVD (P = 0.003, P = 0.022). Tumor-aorta enhancement ratio (arterial) correlated negatively with the extent of fibrosis (P = 0.004). The tumors with greater MVD and higher expression of VEGF tended to show high enhancement in the arterial dominant phase. On the other hand, the tumors with a larger amount of fibrosis showed a negative correlation with the grade of enhancement during the arterial phase. Conclusion: Enhancement patterns on dynamic CT correlated with angiogenesis and may be modified by the extent of fibrosis. © 2009 The WJG Press and Baishideng. All rights reserved. 続きを見る
32.

論文

論文
Sasaki, Motoko ; Araki, Ichiro ; Yasui, Toshiaki ; Kinoshita, Masaru ; Itatsu, Keita ; Nojima, Takayuki ; Nakanuma, Yasuni ; 佐々木, 素子 ; 野島, 孝之 ; 中沼, 安二
出版情報: World Journal of Gastroenterology.  15  pp.615-621,  2009.  Baishideng Publishing Group Co
URL: http://hdl.handle.net/2297/00061734
概要: 金沢大学医薬保健研究域医学系<br />We report a case of primary localized malignant biphasic mesothelioma of the liver in a 66-year-old man associated with asbestosis. The tumor was detected as a hepatic nodule, 4 cm in diameter, in the right lobe (S8 segment) on CT scan. Histopathological examination demonstrated an intrahepatic tumor with central necrosis consisting of a papillary epithelioid pattern on the surface of the liver, microcystic (microglandular or adenomatoid) pattern mainly in the subcapsular area and sarcomatoid pattern intermingled with microcystic pattern in the major part of the hepatic nodular tumor. Tumor cells, especially of epithelioid type, showed distinct immunoreactivity for mesothelial markers (WT-1, calretinin, D2-40, CK5/6, mesothelin, thrombomodulin) and no immunoreactivity for epithelial (adenocarcinoma) markers (CEA, CD15, BerEP4, BG8, MOC31). P53 immunoreactivity was detected focally in papillary epithelioid tumor cells and extensively in microcystic and sarcomatoid components, suggesting that the papillary epithelioid mesothelioma arose on the surface of the liver, and tumor cells showing microcystic and sarcomatoid patterns invaded and grew into the liver. To date, this is the first case of primary localized malignant biphasic mesothelioma of the liver, since all three primary hepatic mesotheliomas reported so far were epithelioid type. © 2009 The WJG Press and Baishideng. All rights reserved. 続きを見る
33.

論文

論文
Yoshikawa, Seiichi ; Zen, Yoh ; Fujii, Takahiko ; Sato, Yasunori ; Ohta, Tetsuo ; Aoyagi, Yutaka ; Nakanuma, Yasuni ; 全, 陽 ; 佐藤, 保則 ; 太田, 哲生 ; 中沼, 安二
出版情報: World Journal of Gastroenterology.  15  pp.4896-4906,  2009.  Baishideng Publishing Group Co
URL: http://hdl.handle.net/2297/00061735
概要: 金沢大学医薬保健研究域医学系<br />AIM: To reveal the characteristics of CD133+ cells in the liver. METHODS: This study examined the hi stological characteristics of CD133 + cells in non-neoplastic and neoplastic liver tissues by immunostaining, and also analyzed the biological characteristics of CD133 + cells derived from human hepatocellular carcinoma (HCC) or cholangiocarcinoma cell lines. RESULTS: Immunostaining revealed constant expression of CD133 in non-neoplastic and neoplastic biliary epithelium, and these cells had the immunophenotype CD133+/CK19+/HepPar -1-. A smal l number of CD133+/CK19-/HepPar-1+ cells were also identified in HCC and combined hepatocellular and cholangiocarcinoma. In addition, small ductal structures, resembling the canal of Hering, partly surrounded by hepatocytes were positive for CD133. CD133 expression was observed in three HCC (HuH7, PLC5 and HepG2) and two cholangiocarcinoma cell lines (HuCCT1 and CCKS1). Fluorescence-activated cell sorting (FACS) revealed that CD133+ and CD133-cells derived from HuH7 and HuCCT1 cells similarly produced CD133+ and CD133- cells during subculture. To examine the relationship between CD133+ cells and the side population (SP) phenotype, FACS was performed using Hoechst 33342 and a monoclonal antibody against CD133. The ratios of CD133+/CD133-cells were almost identical in the SP and non-SP in HuH7. In addition, four different cellular populations (SP/CD133+, SP/CD133-, non-SP/CD133+, and non-SP/CD133-) could similarly produce CD133+ and CD133- cells during subculture. CONCLUSION: This study revealed that CD133 could be a biliary and progenitor cell marker in vivo. However, CD133 alone is not sufficient to detect tumor-initiating cells in cell lines. © 2009 The WJG Press and Baishideng. All rights reserved. 続きを見る
34.

論文

論文
Fujimura, Takashi ; Ohta, Tetsuo ; Oyama, Katsunobu ; Miyashita, Tomoharu ; Miwa, Koichi ; 藤村, 隆 ; 太田, 哲生 ; 尾山, 勝信 ; 宮下, 知治 ; 三輪, 晃一
出版情報: World Journal of Gastroenterology.  12  pp.1336-1345,  2006.  Baishideng Publishing Group Co
URL: http://hdl.handle.net/2297/00061736
概要: 金沢大学医薬保健研究域医学系<br />Selective cyclooxygenase (COX)-2 inhibitors (coxibs) were developed as one of the anti-inflammatory drugs to avoid the various side effects of non-steroidal anti-inflammatory drugs (NSAIDs). However, coxibs also have an ability to inhibit tumor development of various kinds the same way that NSAIDs do. Many experimental studies using cell lines and animal models demonstrated an ability to prevent tumor proliferation of COX-2 inhibitors. After performing a randomized study for polyp chemoprevention study in patients with familial adenomatous polyposis (FAP), which showed that the treatment with celecoxib, one of the coxibs, significantly reduced the number of colorectal polyps in 2000, the U.S. Food and Drug Administration (FDA) immediately approved the clinical use of celecoxib for FAP patients. However, some coxibs were recently reported to increase the risk of serious cardiovascular events including heart attack and stroke. In this article we review a role of COX-2 in carcinogenesis of gastrointestinal tract, such as the esophagus, stomach and colorectum, and also analyze the prospect of coxibs for chemoprevention of gastrointestinal tract tumors. © 2006 The WJG Press. All rights reserved. 続きを見る
35.

論文

論文
津田, 武明 ; 長谷川, 富市 ; 鳴海, 敬倫 ; Tsuda, Takeaki ; Hasegawa, Tomiichi ; Narumi, Takatune
出版情報: 日本機械学会論文集. B編 = Transactions of the Japan Society of Mechanical Engineers, Part B.  67  pp.2174-2179,  2001.  日本機械学会 The Japan Society of Mechanical Engineers
URL: http://hdl.handle.net/2297/00062710
概要: 金沢大学先端科学・社会共創推進機構<br />One-dimensional flow model for non-Newtonian fluids in a single cavity die with a slot is present ed. The equations of mass and momentum in a cavity are treated one-demensionally by assuming an appropriate mean flow over the cross section of the flow. The flow field inside the slot is assumed to be fully developed. The equations of flow for the cavity and the slot are derived and then coupled. We use a finite difference method to solve these governing equations. It is concluded that cavity's geometry and fluid properties affect the uniformity of the flow from the slot, and the presented model agrees with the experimental result. 続きを見る
36.

論文

論文
津田, 武明 ; 長谷川, 富市 ; 鳴海, 敬倫 ; Tsuda, Takeaki ; Hasegawa, Tomiichi ; Narumi, Takatune
出版情報: 日本レオロジー学会誌 = Journal of the Society of Rheology, Japan.  30  pp.179-185,  2002.  日本レオロジー学会 Japanese Society of Rheology
URL: http://hdl.handle.net/2297/00062716
概要: 金沢大学先端科学・社会共創推進機構<br />One-dimensional flow model for non-Newtonian fluids in a dual cavity slot die is presented. The v iscosity of non-Newtonian fluids is treated as the Ellis model. The conservation equations of mass and momentum in a dual-cavity slot die are one-dimensionally simplified by assuming an appropriate mean flow over the cross section of the flow. The flow field in the slot is assumed to be fully developed. The equations of flow for the cavity and the slot are derived separately and then coupled. We use a finite difference method to solve these governing equations. Using this model, we find that the location and the cross-section area of a secondary cavity have large effects on the distribution of outlet flow. It is concluded that the dual cavity die can effectively reduce the flow non-uniformity. 続きを見る
37.

論文

論文
津田, 武明 ; 長谷川, 富市 ; 鳴海, 敬倫 ; Tsuda, Takeaki ; Hasegawa, Tomiichi ; Narumi, Takatune
出版情報: 日本レオロジー学会誌 = Journal of the Society of Rheology, Japan.  30  pp.133-139,  2002.  日本レオロジー学会 Japanese Society of Rheology
URL: http://hdl.handle.net/2297/00062717
概要: 金沢大学先端科学・社会共創推進機構<br />One-dimensional flow model for non-Newtonian fluids in the inside of a slot die is presented. The viscosity of non-Newtonian liquids is given by the Ellis model. The conservation equations of mass and momentum in the slot die are treated one-dimensionally by assuming an appropriate mean flow over the cross section of the flow. The flow field in the slot is assumed to be fully developed. The equations of flows for the cavity and the slot are derived separately and then coupled. We use a finite difference method to solve these governing equations. It is concluded that a flow model using the Ellis model for liquid viscosity is useful to predict the distribution of flow rate from the die. 続きを見る
38.

論文

論文
Asano, Tetsuo ; Bose, Prosenjit ; Carmi, Paz ; Maheshwari, Anil ; Shu, Chang ; Smid, Michiel H. M. ; Wuhrer, Stefanie ; 浅野, 哲夫
出版情報: CCCG 2007 - 19th Canadian Conference on Computational Geometry.  pp.185-188,  2007. 
URL: http://hdl.handle.net/2297/00062794
概要: 金沢大学<br />The distance preserving graph embedding problem is to embed vertices of a given weighted graph into points in 2-dimensional Euclidean space so that for each edge the distance between their corresponding endpoints is as close to the weight of the edge as possible. If the given graph is complete, that is, if distance constraints are given as a full matrix, then principal coordinate analysis can solve it in polynomial time. A serious disadvantage is its quadratic space requirement. In this paper we develop linear-space algorithms for this problem. A key idea is to partition a set of n objects into disjoint subsets (clusters) of size O(√n) such that the minimum inter cluster distance is maximized among all possible such partitions.<br />CCCG2007 The 19th Canadian Conference on Computational Geometry, August 20-22, 2007 続きを見る
39.

論文

論文
原, 佑介 ; Hara, Yusuke
出版情報: Core Ethics = 立命館大学大学院先端総合学術研究科紀要 コア・エシックス.  4  pp.291-304,  2008.  立命館大学大学院先端総合学術研究科
URL: http://hdl.handle.net/2297/00062997
概要: 金沢大学人間社会研究域歴史言語文化学系<br />The Russo-Japanese War (1904-1905) prompted people to think seriously about how Japan should pu rsue arole as an important actor on the stage of world politics. Kinoshita Naoe, a pacifist and “socialistic Christian,”vigorously criticized the nationalism that had been gaining power with the rise of Japan’s presence in EastAsia. Many nationalists at that time advocated that Japan can and should play some positive role ininternational affairs in its own manner.In January 1905, Ebina Danjo, a “nationalistic Christian,” published an article in praise of the rapid progressof Japan’s national strength. He admired Japan as the “Empire of the Son of God” to come. He declared that,led by “Japanese Spirit,” the nation was destined to bring the ultimate solution to the critical situation of EastAsia and in turn to that of the whole world. A controversy over “Japanese Spirit” was triggered by KotokuShusui, a socialist, who ridiculed it. Adding to the debate, Kinoshita criticized the acclaim for such spirit asencouraging imperialism. He pointed out that, when adherents of spirit talk of state, they overlook the person,which at any time must be the first unit of concern, even in the heat of enthusiasm for the nation.<br />出版者の許可を得て登録_20210716 続きを見る
40.

論文

論文
藤居, 久美子 ; 須釜, 淳子 ; 中谷, 壽男 ; 真田, 弘美 ; 大桑, 麻由美 ; Fujii, Kumiko ; Sugama, Junko ; Nakatani, Toshio ; Sanada, Hiromi ; Okuwa, Mayumi
出版情報: 日本褥瘡学会誌 = Japanese journal of pressure ulcer.  9  pp.152-159,  2007.  日本褥瘡 Japanese Society of pressure ulcer
URL: http://hdl.handle.net/2297/00063278
概要: 金沢大学医薬保健研究域保健学系<br />本研究の目的は, 1方向のずれが褥瘡治癒過程にどのような影響を及ぼすのかを明らかにすることである. 方法は, ラット褥瘡モデルを用いて, 圧迫と1方向(尾側方向)のずれを1kgの重りを用いて負荷した 群(実験群)と圧迫のみを負荷した群(対照群)との治癒過程を肉眼的・組織学的に比較した. 肉眼的所見では実験群には局所の壊死がみられ, 対照群より治癒が遅延した. 組織学的所見では実験群で7, 14日目ともに尾側の筋層の変性が顕著であった. また, 頭側の真皮にうっ血, 出血がみられた. 対照群では, 7日目, 14日目ともに表皮の欠損はなかったが, 中央部の損傷は頭側, 尾側より強かった. 以上より, 1方向のずれと圧迫を負荷した褥瘡では尾側の皮下組織から筋層にかけての変性とそのために引き起こされる頭側の真皮のうっ血によって, 圧迫のみを負荷した褥瘡と比較して, 壊死が形成され, 治癒が遅延することが示唆された.<br />This study aimed to clarify the effects of shear stress towards the caudal side in pressure-induced ischemic wound healing in a rat model. We compared wound healing that produced pressure combined with shear using a 1kg weight (experimental group) with wound healing that produced pressure only (control group). Macroscopic findings showed that the experimental group developed local necrosis and healing was delayed by 1 week compared with the control group. Histological findings showed that necrosis had developed to the muscle layer on the tail side and that hemostasis and bleeding occurred to the dermal layer on the head side in the experimental group over 7 and 14 days. In the control group, the wound was covered by epidermis and muscular degeneration, and necrosis in the middle was more severe than on the head and tail side. These results suggested that wounds produced by pressure and shear formed necrosis and so suffered delayed healing compared with the control group. The reason for these results might be the development of necrosis to the muscle layer on the tail side and hemostasis to the dermal layer on the head side.<br />日本褥瘡学会の許可を得て登録_2021.9.22 続きを見る
41.

論文

論文
北山, 幸枝 ; 中谷, 壽男 ; 真田, 弘美 ; 田中, 愛 ; 青木, 和恵 ; 佐藤, 文 ; 玉井, 奈緒 ; Kitayama, Yukie ; Nakatani, Toshio ; Sanada, Hiromi ; Tanaka, Ai ; Aoki, Kazue ; Sato, Aya ; Tamai, Nao
出版情報: 日本褥瘡学会誌 = Japanese journal of pressure ulcer.  7  pp.818-826,  2005-10.  日本褥瘡学会 Japanese Society of pressure ulcer
URL: http://hdl.handle.net/2297/00063280
概要: 金沢大学医薬保健研究域保健学系<br />[背景]褥瘡治癒には局所環境の整えが重要であり, 創洗浄だけでなく創周囲皮膚の清潔ケアも提唱されている. 目的:創周囲皮膚に対しどのような清潔ケアが治癒過程を促進するか, マウスを用いて検討した. [方法]マウスに全層創傷を作製し創周囲を弱酸性の液体石鹸(以下「皮膚洗浄剤」)で洗浄, 生理食塩水(以下「生食」)洗浄, ポビドンヨード消毒, ケアなしの4群に分けてケア後, 毎日創周囲に黄色ブドウ球菌を塗付し, 創傷被覆材で覆った. 肉眼的所見, 治癒期間, 細菌叢, 創周囲角質水分量を測定し, 組織所見の変化と合わせて4群を比較した. [結果]表皮化の速度, 肉眼的変化, 治癒時の創周囲角質水分量, 平均治癒期間, 組織学的皮膚構造変化の点で, 皮膚洗浄剤群が最も治癒促進していた. ついでポビドンヨード群, 生食群, ケアなし群の順であった. [結語]皮膚洗浄剤による創周囲皮膚の清潔が, 創傷治癒を促進させる最も有効な局所ケア方法であることが示唆された.<br />For wound healing, managing the wound and its environs is crucial. It is unclear, however, whether cleansing the skin surrounding wounds promotes wound healing. Thus, the aim of this study is to examine wound healing under four different care regimens of full- thickness skin wounds on mice:1. cleansing the skin surrounding wounds with detergent, 2. saline, 3. povidone-iodine, or 4. no care. Four full-thickness skin wounds were made on backs of mice. The above-described care regimens were performed, then Staphylococcus aureus was applied to the skin surrounding the wounds, and the wounds and the surrounding skin were covered with hydrocolloid dressings. These interventions were performed every day. The period of wound healing was 8 + 0.8 days in the detergent group, 8.8 + 1.5 days in the saline group, 9 + 0.8 days in the povidone-iodine group, and 10.3 + 0.96 days in the no care group. There was a significant difference between the detergent and the no care groups. In histological findings, reepithelization of the detergent group was achieved 7 days after wounding, and fibrous granulation tissue of the no care group on day 14 was the slowest to develop. These findings indicate that to cleanse the skin surrounding wounds with detergent is the most effective care in promoting wound healing, and detergent care can be effective for the care of pressure ulcers contaminated with bacteria.<br />日本褥瘡学会の許可を得て登録_2021.9.22 続きを見る
42.

論文

論文
黄, 芳 ; 中谷, 壽男 ; 真田, 弘美 ; 紺家, 千津子 ; 鈴木, 定 ; 佐藤, 文 ; 間脇, 彩奈 ; Huang, Fang ; Nakatani, Toshio ; Sanada, Hiromi ; Konya, Chizuko ; Suzuki, Sadamu ; Sato, Aya ; Mawaki, Ayana
出版情報: 日本褥瘡学会誌 = Japanese journal of pressure ulcer.  7  pp.798-803,  2005-10.  日本褥瘡学会 Japanese Society of pressure ulcer
URL: http://hdl.handle.net/2297/00063282
概要: 金沢大学医薬保健研究域保健学系<br />ポケットを有する褥瘡が治癒しがたいことを被蓋部の組織像から検討した. 外科治療の目的で切除されたポケットを有する褥瘡のポケット被蓋部13組織を, 肉眼的, 組織学的方法で研究した. 肉眼的所見:皮膚 はポケット開口部で白く浸軟し, 表皮が開口部より内表面の一部を覆い停止していた. 断面では, 線維化した白い結合組織がみられた. 組織学的所見:表皮は基部から開口部に向かって厚さを増し, 表皮索または突起と真皮乳頭は互いに咬み合い, 伸展が停止した表皮は棍棒状または舌状形態を呈していた. 表皮下では, 正常な膠原線維束はみられず, 線維性瘢痕を呈し, 炎症細胞が少数みられた. 内表面は炎症細胞を含むさまざまな厚さのフィブリン様膜に覆われていた. 3組織の開口部にのみ炎症性肉芽組織が観察された. これらの結果は, ポケット被蓋部内表面を覆うフィブリン様膜と瘢痕組織が表皮の再生と肉芽組織の増殖を阻害し, 被蓋部と創底部の接着を妨げている可能性を示唆している.<br />This study macroscopically and microscopically examined the wound roof from thirteen pressure ulcers that were surgically excised. Based on these findings, we discussed the cause of intractability of pressure ulcers with undermining. The skin covering the wound roof was white and macerated at the wound orifice area. The epidermis covered part of the inner surface of the wound roof. White fibrosis was observed under the epidermis at the cutting plane of the roof. The epidermis became increasingly thicker from the base area of the roof to the wound orifice area, and interdigitated with the dermis. The edge of the extending epidermis showed a club-like or tongue-like shape. Under the epidermis, there was no normal collagen bundle, but there was collagenous scar tissue. Moreover, a few inflammatory cells and blood vessels were present in the scar. The inner surface of the wound roof was lined with various thicknesses of fibrinoid tissue including inflammatory cells. Inflammatory granulation tissue was observed in the wound orifice area in only 3 of 13 tissue specimens, indicaing that fibrinoid tissue over the inner surface of the roof and scar of the roof could impede the development of granulation tissue and extension of the epidermis.<br />日本褥瘡学会の許可を得て登録_2021.9.22 続きを見る
43.

論文

論文
田中, 愛 ; 中谷, 壽男 ; 真田, 弘美 ; 紺家, 千津子 ; 山崎, 真代 ; 田端, 恵子 ; 川上, 重彦 ; Tanaka, Ai ; Nakatani, Toshio ; Sanada, Hiromi ; Konya, Chizuko ; Yamazaki, Masayo ; Tabata, Keiko ; Kawakami, Shigehiko
出版情報: 日本褥瘡学会誌 = Japanese journal of pressure ulcer.  6  pp.51-55,  2004-04.  日本褥瘡学会 Japanese Society of pressure ulcer
URL: http://hdl.handle.net/2297/00063283
概要: 金沢大学医薬保健研究域保健学系<br />金沢大学医学部保健学科褥瘡ケアチームが介入した坐骨結節部褥瘡患者3名において, 大小不同に突出する不良肉芽を認めた. これまでに, それら突出する不良肉芽に関する報告はなく, 今回はその形態学的特徴 を明らかにし, 患者背景と併せて病態と原因を検討することを目的とした. 組織学的検索には, HE染色およびAzan染色を使用した. その結果, 組織学的には, フィブリン様浸出物や炎症性細胞主体の厚い膜様物と拡張した毛細血管, そして大量の炎症性細胞浸潤を3名に共通して認めた. また, 対象患者3名ともに, 日中の大半を車椅子上の座位にて生活していたことから, それら組織学的変化の要因は長時間の圧迫, 移動時の摩擦とずれが示唆された. 今後は, 坐骨結節部褥瘡患者に対して, さらに徹底した座位時の圧管理や姿勢保持を行う必要があると考える. 「はじめに」褥瘡は一定の場所に一定以上の圧力が加わり続けることにより, 局所皮膚の血流が途絶え, 阻血性の壊死が生じて発症する皮膚潰瘍である.<br />In three patients with ischial pressure ulcers who were managed by the pressure ulcer care team of Kanazawa University, we observed unhealthy granulation tissues projecting from the bed of the ulcers. To our knowledge, there are no previous reports describing such granulation tissues. Thus, we investigated to clarify the cause of the development of such pathological granulation tissue based on histological findings and the lifestyles of the patients. For histological examination, we used H-E staining and Azan staining, which demonstrated a thick fibrinoid membrane, numerous inflammatory cells, and dilated capillary vessels in the granulation tissue. These three histological findings were common to all patients. Moreover, these patients sat in wheelchairs for very long periods daily. Therefore, the long-term pressure, shear, and friction from the wheelchair were suggested as factors contributing to such histological changes. These results indicate that we should more strictly manage the pressure and posture while sitting in patients with ischial pressure ulcer.<br />日本褥瘡学会の許可を得て登録_2021.9.22 続きを見る
44.

論文

論文
越村, 洵子 ; 紺家, 千津子 ; 真田, 弘美 ; 中谷, 壽男 ; 須釜, 淳子 ; 矢島, 博昭 ; 田端, 恵子 ; Koshimura, Junko ; Konya, Chizuko ; Sanada, Hiromi ; Nakatani, Toshio ; Sugama, Junko ; Yajima, Hiroaki ; Tabata, Keiko
出版情報: 日本褥瘡学会誌 = Japanese journal of pressure ulcer.  6  pp.607-615,  2004.  日本褥瘡学会 Japanese Society of pressure ulcer
URL: http://hdl.handle.net/2297/00063287
概要: 金沢大学医薬保健研究域保健学系<br />本研究の目的は, 褥瘡のポケット形成過程の原因, 要因を明確にすることである. 13部位の褥瘡を発見からプロスペクティブに毎日観察したあと, ポケット形成あり群となし群に分類し, 創の形態と身体状況 ならびに看護ケアを比較した. その結果, ポケットの形態は, 全周と部分, 筋層と皮下組織に達するものに分類された. ポケット形成前の創の特徴は「顕著な骨突出部と壊死組織との位置の違い」「硬く乾燥し, 限局した黒色壊死組織」「黒色壊死組織周囲に持続する発赤」であった. これらを引き起こす原因は「骨突出部による強い圧迫」「骨突出部上に起こる皮膚のずれ」「感染」であった. ポケットの形態別に原因をみると, 全周, 部分ポケットの違いにはずれの方向が関係し, 筋層, 皮下組織に達するポケットの違いには感染が関係していた. 以上の結果から, ポケット形成モデルを構築した.<br />The purpose of this study was to clearly identify the causes and influencing factors responsible for creating undermining pressure ulcers. We observed 13 pressure ulcers on a daily basis that developed on subjects who participated in this prospective study. The subjects were separated into two groups :(1)those who developed undermining, and (2)those who did not develop undermining pressure ulcers. We then evaluated the formation changes, the subjects' physical changes and the nursing care provided. Undermining pressure ulcers were further subdivided according to their depth (reaching the fascia or the subcutaneous tissues) and their type (whether the wounds were partial margin or full margin). Distinctive characteristics of the pressure ulcers before undermining occurred were a difference in the position of necrotic tissue and bony prominence, the presence of hard, dry and black escher, and persistent erythema. The causes of undermining can be attributed to high pressure caused by bony prominence, shear occurring over the bony prominent skin, and infection. The type of undermining was determined to be related to the direction of shear, and infection was related to the wound depth. We constructed a model of formation of the undermining based on these results.<br />日本褥瘡学会の許可を得て登録_2021.09.22 続きを見る
45.

論文

論文
紺家, 千津子 ; 真田, 弘美 ; 須釜, 淳子 ; 大桑, 真由美 ; 中谷, 壽男 ; 永川, 宅和 ; Konya, Chizuko ; Sanada, Hiromi ; Sugama, Junko ; Okuwa, Mayumi ; Nakatani, Toshio ; Nagakata, Takukazu
出版情報: 日本褥瘡学会誌 = Japanese journal of pressure ulcer.  4  pp.60-69,  2002-04.  日本褥瘡学会 Japanese Society of pressure ulcer
URL: http://hdl.handle.net/2297/00063288
概要: 金沢大学医薬保健研究域保健学系<br />本研究の目的は, ポケット形成のある褥瘡を形態的に分類し, 治癒過程を明らかにすることである. さらに, その治癒過程の分類と看護ケア要因および身体要因との関係を導き出すことにある. 65歳以上の高 齢者69名が保有するStage III・IVの褥瘡を調査した. 褥瘡は79部位あり, そのうち45部位(57.0%)にポケット形成を認めた. 褥瘡の治癒過程を帰納的方法により分類すると, 深達度ごとにポケットと表皮化方法によって10に分類できた. 特徴的な形態の変化には, 表皮化ではなく収縮のみによる創閉鎖があった. 収縮は通常の表皮化する創より, 治癒期間が延長していた. さらに, ポケット内に壊死組織はないが創の収縮により逆にポケットが拡大するものがあった. 看護ケア要因と身体要因と関係があったのは, ポケット形成と収縮のみによる創閉鎖であった. ポケット形成は, 骨突出, 尿失禁, 拘縮, 臀部のたるみが関係していた. 収縮のみによる創閉鎖は, 骨突出, 尿失禁, ずれ, 拘縮が関係していた.<br />The purpose of this study was to categorize pressure ulcers with various forms of undermining and to examine the healing process of each category. Another attempt to determine whether nursing care and/or physical factors influence the formation of pressure ulcers was also considered. This study was performed with the consent of 69 elderly (65 years old or older) patients with stage III or IV pressure ulcers, who had a total of 79 pressure ulcers. Of the 79 pressure ulcers, 45 (57%) were undermining. Based on the pressure ulcer healing process for stage III or IV pressure ulcers with undermining and epithelialization, 10 healing patterns were inductively categorized. A significant observation was the fact that in undermining with no necrotic tissue, the undermining spread inversely to wound contraction, a phenomenon we categorized as "Us" (Undermining-spread-partial wound margin). Epithelialized wounds closed only by contraction were categorized as Ec (Epithelialization-contraction). Our results showed the wound healing period to be longer for general epithelialization than for "Ec" type wounds. Nursing care and/or physical factors that influenced the form and healing pattern of "Undermining" were externally bony prominence, urinary incontinence, contracture, and flabby skin in the buttock area. Similarly, the influencing factors of "Ec" were an externally bony prominence, urinary incontinence, shear, and contracture.<br />日本褥瘡学会の許可を得て登録_2021.09.22 続きを見る
46.

論文

論文
福山, 泰治郎 ; 山本, 政儀 ; 井上, 睦夫 ; 恩田, 裕一 ; 水垣, 滋 ; 成沢, 知広 ; Taijiro Fukuyama, ; Yamamoto, Masayoshi ; Inoue, Mutsuo ; Onda, Yuichi ; Mizugaki, Shigeru ; Narisawa, Tomohiro
出版情報: 日本森林学会大会発表データベース = The Japanese Forest Society Congress.  120  pp.PC2-09,  2009.  日本森林学会 The Japanese Forestry Society
URL: http://hdl.handle.net/2297/00063373
概要: 金沢大学環日本海域環境研究センター<br />The Japanese Forest Society Congress 120, Session ID : Pc2-09
47.

論文

論文
Murata, Yoshimasa ; Muroyama, Toshiharu ; Kawabata, Yoshiko ; Yamamoto, Masayoshi ; Komura, Kazuhisa ; 山本, 政儀 ; 小村, 和久
出版情報: Journal of radiation research.  42  pp.S55-74,  2001.  日本放射線影響学会, Journal of Radiation Research 編集委員会
URL: http://hdl.handle.net/2297/00063380
概要: 金沢大学環日本海域環境研究センター<br />Specific activities (Bq/g-element) of residual neutron-induced radionuclides by the JCO criticali ty accident were measured for soil, concrete block and chemical reagent samples collected in the JCO campus. Induced radionuclides such as 24Na, 46Sc, 54Mn, 59Fe, 60Co, 65Zn, 82Br, 122Sb, 134Cs and 140La were detected in the samples, depending on the ground distance from the accident point and the sampling date. Apparent thermal, epi-thermal and fast neutron fluences, which reached the sample at each point, were roughly estimated from the specific activities and cross sections of the target nuclides taken from a literature. The present data are believed to be important as validation data for a three-dimensional neutron transport model calculation. 続きを見る
48.

論文

論文
大塚, 良仁 ; 山本, 政儀 ; 小藤, 久毅 ; 横田, 喜一郎 ; 小村, 和久 ; Ohtsuka, Yoshihito ; Yamamoto, Masayoshi ; Kofuji, Hisaki ; Yokota, Ki-ichirou ; Komura, Kazuhisa
出版情報: 地球化学 = Chikyukagaku.  35  pp.85-106,  2001-06-20.  日本地球化学会 The Geochemical Society of Japan
URL: http://hdl.handle.net/2297/00063582
概要: 金沢大学環日本海域環境研究センター<br />The behavior of 210Pb and 210Po in Lake Biwa, a large mesotorophic lake situated in the Kinki dis trict of Japan, was investigated by analyzing lake water at various depths and precipitation at approximately monthly intervals for a period of 1.5 years, and sediments, streams flowing into and out of the lake. Flux balance calculation indicated that atmospheric deposition was the major source (97% of total) of 210Pb to the lake, and for 210Po growth in-situ from the decay of 210Pb contributed about 75% of the total 210Po supply to the lake. Most (about 90%) of all the 210Pb inputs to this lake was found to be incorporated into sediment. Residence times via sedimentation in the epilimnion and hypoliminion were estimated to be 27 (6-40) and 22 (5-45) days, respectively, for 210Pb and 95 (47-146) and 32 (7-109) days for 210Po. These residence times suggest that there is a difference between 210Pb and 210Po in the extent of their cycling in the water column, with a more rapid removal of 210Pb than 210Po. Overall, 210Pb and 210Po were, furthermore, found to be removed more efficiently during the transit periods of high biological productivity, such as plankton blooms. 続きを見る
49.

論文

論文
小村, 和久 ; 稲垣, 美幸 ; 西川, 方敏 ; 中西, 孝 ; 早川, 和一 ; 唐, 寧 ; 楊, 小陽 ; 飯田, 孝夫 ; 森泉, 純 ; Komura, Kazuhisa ; Inagaki, Miyuki ; Nishikawa, Katatoshi ; Hayakawa, Kazuichi ; Tang, Ning ; Yang, Xiaoyang ; Iida, Takao ; Moriizumi, Jyun
出版情報: 地球科学 = Earth Science.  61  pp.335-342,  2007-09-25.  地学団体研究会 The Association for the Geological Collaboration in Japan
URL: http://hdl.handle.net/2297/00063583
概要: 金沢大学環日本海域環境研究センター<br />Variations of radiation levels before and after the Noto Hanto Earthquake in 2007 have been analy zed from the point of view of environmental radioactivity. The 210Pb activities in the airborne particles are collected from Nishi-Futamata in Wajima, are analyzed. The Radon activity at Hegura Island located 50km North of Wajima, and the spatial gamma rays at Nishi-Futamata are measured since April 21, 2007. Abnormal increase of 210Pb activity started 3 weeks before the earthquake are found, suggesting the maximum value just before the earthquake, because it decrease to normal level after 2 weeks. Increase of radon level was not observed at Hegura Island, however, increase of radiation level at Nishi-Futamata area continued for 6 weeks after the earthquake, and settled to normal level in middle of May 2007.<br />環境放射能の観点から能登半島地震発生前後の放射能関連のデータの解析を試みた.解析したのは,輪島市西二又地区で採取した大気浮遊塵中の210Pb,輪島沖50kmに位置する舳倉島のラドン濃度,地震発生後の4月21日から西二又地区で連続測定を実施した空間γ線レベルの3項目である.その結果,地震発生約3週間前から大気浮遊塵試料のラドンの娘核種210Pbの濃度が増加し,地震直前にピークに達した後に低下に転じ,約2週間後にほぼ平常値に回復していたことが分かった.舳倉島のラドンには地震の影響は見られなかったが,西二又における空間γ線レベルはラドンに由来すると考えれる高い値が約6週間後も続き5月中頃に平常値に戻ったことが明らかになった. 続きを見る
50.

論文

論文
早川, 和一 ; Hayakawa, Kazuichi
出版情報: ファルマシア = Farumashia くすりの科学.  45  pp.797-801,  2009-08-01.  Pharmaceutical Society of Japan 日本薬学会
URL: http://hdl.handle.net/2297/00063588
概要: 金沢大学理工研究域自然システム学系
51.

論文

論文
早川, 和一 ; Hayakawa, Kazuichi
出版情報: ファルマシア = Farumashia くすりの科学.  40  pp.195-197,  2004-03-01.  Pharmaceutical Society of Japan 日本薬学会
URL: http://hdl.handle.net/2297/00063590
概要: 金沢大学理工研究域自然システム学系
52.

論文

論文
石渡, 明 ; 小泉, 一人 ; 市山, 祐司 ; 柳田, 祐樹 ; 町, 澄秋 ; Ishiwatari, Akira ; Koizumi, Kazuto ; Ichiyama, Yuji ; Yanagida, Yuki ; Machi, Sumiaki
出版情報: 地質学雑誌 = The Journal of the Geological Society of Japan.  112  pp.XIII-XIV,  2006-07-15.  日本地質学会 The Geological Society of Japan
URL: http://hdl.handle.net/2297/00063624
概要: 金沢大学理工研究域自然システム学系
53.

論文

論文
山田, 茂昭 ; 松田, 博貴 ; 大村, 明雄 ; Yamada, Shigeaki ; Matsuda, Hideaki ; Omura, Akio
出版情報: 地質学雑誌 = The Journal of the Geological Society of Japan.  113  pp.19-22,  2007.  日本地質学会 The Geological Society of Japan
URL: http://hdl.handle.net/2297/00063642
概要: 金沢大学理工研究域自然システム学系<br />This study provides new uranium-series dates of the Ryukyu Group in Ishigaki-jima Island, South R yukyu Arc (SRA). Two fossil hermatypic coral samples taken from coral limestone in the northern and southern parts of the island were dated as 118.5±2.0 ka and 119.9±2.0 ka, respectively, which correlates to oxygen isotope stage 5.5. This fact suggests that a reef complex was formed during isotope stage 5.5 in Ishigaki-jima Island, just like in Hateruma-jima and Yonaguni-jima Islands, SRA. The dated coral in the northern part was collected at an elevation of 1.3 m. It is, therefore, inferred that the northern part of the island was tectonically stable since isotope stage 5.5. On the other hand, the dated corals in the southern part was collected at an elevation of 15 m, which indicated that the southern part of Ishigaki-jima has been uplifted at rate of about 0.10 m/ky since isotope stage 5.5. Our data clearly show that the western part of SRA has been situated in the tectonic setting of uprift for the last 125 ky.<br />Uranium-series dates of fossil hermatypic corals in Ishigaki-jima Island, Okinawa Prefecture, and their significance 続きを見る
54.

論文

論文
山本, 真也 ; 長谷川, 卓 ; Yamamoto, Shinya ; Hasegawa, Takashi
出版情報: 地質学雑誌 = The Journal of the Geological Society of Japan.  112  pp.243-256,  2006.  日本地質学会 The Geological Society of Japan
URL: http://hdl.handle.net/2297/00063644
概要: 金沢大学理工研究域自然システム学系<br />北海道穂別北部地域のMiddle-Upper Turonian亜階で,国際的に年代指標性のある浮遊性有孔虫が連続的に産出し,重要な浮遊性有孔虫帯境界であるHelvetoglobotruncana helvetica帯上限の層序学的位置を推定することができた.更に,国際的に同種と共産するとされている浮遊性有孔虫3種との共産が確認され,鍛冶屋の沢ルートの上部がほぼH. helvetica帯最上部であることが明らかになった.同ルートの炭素同位体比の変動は,汎世界的なMiddle-Upper Turonian亜階の変動と調和的であり,浮遊性有孔虫層序から推定された年代を支持する.また,Middle Turonian亜階でArchaeoglobigerina属がH. helveticaと共産することから,同属の初出現の時期は従来の知見より古いことが示された.<br />Continuous occurrence of international planktonic foraminiferal index species was recognized in the Middle to Upper Turonian successions in the Hobetsu area, Hokkaido, Japan. It enables us to assume the stratigraphic position of the upper limit of the Helvetoglobotruncana helvetica Zone, an important planktonic foraminiferal zonal boundary. Helvetoglobotruncana praehelvetica, Marginotruncana pseudolinneiana, and Praeglobotruncana gibba, which are also internationally recognizable species, occur associated with Helvetoglobotruncana helvetica. This association indicates that stratigraphic top of the Kajiyanosawa route should be assigned to close to the top of the total range of Helvetoglobotruncana helvetica. Correlation of the carbon isotope fluctuation through the Kajiyanosawa route with that of well-studied sections supports our chronostratigraphic interpretation from planktonic foraminiferal biostratigraphyConcurrence of genus Archaeoglobigerina with Helvetoglobotruncana helvetica in the Middle Turonian of this area demonstrates that the timing of the first appearance of Archaeoglobigerina is older than previous known. 続きを見る
55.

論文

論文
椎名, 徹 ; 村本, 健一郎 ; Shina, Toru ; Muramoto, Ken-ichiro
出版情報: Journal of the Institute of Image Electronics Engineers of Japan = 画像電子学会誌.  31  pp.345-353,  2002.  画像電子学会 = The Institute of Image Electronics Engineers of Japan
URL: http://hdl.handle.net/2297/00052948
概要: 降雪雪片の衝突・併合成長には,個々の雪片の落下速度の相違や雪片が落下するときの揺らぎが関係しているので,成長のメカニズム解明には雪片の落下運動を解析することが重要である.本研究では,水平同一方向からシャッタースピードおよび撮影視野の設定が異 なる2台のCCDカメラを用いて,降雪雪片の形状と落下運動を同時に撮影し,連続的に画像処理するシステムを開発した.雪片の落下姿勢とその変動および形状の解析を行うために,落下中の雪片を狭い視野にて数フィールド連続して撮影した.また,同一の雪片を広い視野にて連続約20フィールド観測して,雪片の落下軌跡を追跡することにより落下運動を解析した.落下運動の特徴量として平均角度変動量を定義し,形状特徴量と落下姿勢および落下運動の変化との関係を求めた結果,落下姿勢を表す慣性主軸の長軸が落下の方向に対してほぼ直角となり,空気抵抗を大きく受ける方向に落下する傾向が実験的に確認された.<br />Falling snowflakes were photographed simultaneously by two CCD cameras having different shutter speeds. The high speed camera was used for determining the shape and the low speed one to measure the motion. The shape of a snowflake and its falling motion are analyzed using continuously photographed image frames. The falling motion of a snowflake is calculated by tracing its position in subsequent frames. Relationships between shape and motion parameters were analyzed. Data indicate that tilt angle and falling direction were perpendicular to each other. It is considered that snowflakes encounter more resistance from air toward the upper direction during their fall. 続きを見る
56.

論文

論文
安川, 哲夫 ; Yasukawa, Tetsuo
出版情報: 日本の教育史学 = Studies in the History of Education.  46  pp.182-200,  2003.  教育史学会 = The Japan Society for the Historical Studies of Education
URL: http://hdl.handle.net/2297/00052997
概要: 金沢大学人間社会研究域学校教育系
57.

論文

論文
Tatsukawa, Sanae ; Mikage, Masayuki ; 御影, 雅幸
出版情報: Journal of Traditional Medicines.  24  pp.200-208,  2007.  和漢医薬学会 = Medical and Pharmaceutical Society for WAKAN-YAKU
URL: http://hdl.handle.net/2297/00053044
概要: 金沢大学医薬保健研究域薬学系<br />漢薬 「木通」 は, 日局でその基源がアケビ科のアケビ又はミツバアケビの蔓性の茎であると規定され, わが国での国内需要のすべては国内野生品でまかなわれている。 日本に分布する本属植物は主にアケビ, ミ ツバアケビ及びこれらの雑種とされているゴヨウアケビの 3 分類群であるが, 生薬について種の区別はなされておらず, ゴヨウアケビ由来のものも流通している可能性が高い。 また, アケビとミツバアケビについて薬理作用や成分に差が認められ, 同属植物内でも種による使い分けの必要性が示唆されている。 しかし, 日本産については生薬の形態から原植物の鑑別は不可能であるとされてきた。 そこで, 日本産本属植物3分類群の木質茎の形態学的特徴を検討し, 市場品の基源鑑別法の確立を試みた。 その結果, 木質茎表面の色, コルク組織の構造及び茎の半径とコルク層の厚みの関係において相違が認められ, 90 % 以上の精度で 3 分類群を識別できる検索表を作成した。 これにより, 日本産 「木通」 について原植物の識別がほぼ可能になり, 日本産 「木通」 の主産地である信越及び四国産にゴヨウアケビ由来品が流通していることが示唆された。<br />The Japanese Pharmacopoeia Fifteenth Edition prescribes Akebiae Caulis, Mokutsu in Japanese, should be the woody stem of Akebia quinata Decaisne and A. trifoliata Koidzumi of the family Lardizabalaceae. We examined morphologically the woody stems of 3 wild Akebia taxa growing in Japan, A. quinata, A. trifoliata, and A. × pentaphylla Makino, for the purpose of finding morphological criteria to discriminate them and for identifying Mokutsu in the market. We found that the 3 taxa could be distinguished by a combination of surface color of stem, inner morphologies of stone cells and sclerenchyma cells, etc. with an accuracy of more than 90%, though it had been reported that A. quinata and A. trifoliata could not be distinguished by only stem anatomy. Using these criteria, we found that the woody stems of all 3 Akebia taxa were circulated equally in the Japanese market. This is the first record that the stem of A. × pentaphylla is circulating in the market as Mokutsu. © 2007, Medical and Pharmaceutical Society for WAKAN-YAKU. All rights reserved. 続きを見る
58.

論文

論文
金沢大学文学部史学科
出版情報: 金沢大学文学部論集. 史学・考古学・地理学篇 = Studies and essays. History, archaelogy, geography.  pp.1-22,  2004-03-20.  金沢大学文学部
URL: http://hdl.handle.net/2297/00049917
59.

論文

論文
笠井, 純一 ; Kasai, Junichi
出版情報: pp.1-47,  2004-03-20.  金沢大学文学部 — THE FACULTY OF LETTERS, KANAZAWA UNIVERSITY
URL: http://hdl.handle.net/2297/00049918
60.

論文

論文
楊, 暁旗 ; 松平, 光男 ; 新宅, 救徳 ; Yang, Xiaoqi ; Matsudaira, Mitsuo ; Shintaku, Sukenori
出版情報: 繊維機械学会誌 = Journal of the Textile Machinery Society of Japan.  58  pp.T62-T67,  2005.  日本繊維機械学会 = Textile Machinery Society of Japan
URL: http://hdl.handle.net/2297/00049955
概要: 金沢大学人間社会研究域学校教育系<br />Relationship between measured values of characteristic parameters of disposable diapers and subjec tive evaluation data was investigated precisely. As subjective evaluation of water diffusion in disposable diapers is dynamic process related to the diffusion of water, evaluation conditions and the time are very important. Amount of pouring water should be less than the critical saturated region of diapers to obtain reliable subjective results. The sense of "sarasara(dry)" and "touch" agreed well in the case of wet diapers, and it might be very important to keep the surface to be dried to get comfortable disposable diapers. Correlation coefficients between each objective value and subjective data were calculated and it was shown that the sense of "sarasara" was evaluated by a new parameter of Vh, that is, the peak value of remained water curve divided by the convergence time of the water. Further, "sarasara" was regressed with Fw, that is, the diffusion rate in horizontal direction and Fh, that is, the diffusion rate in vertical direction. 続きを見る
61.

論文

論文
松平, 光男 ; 竹内, 千乃 ; 出店, 真由美 ; 近藤, 耕司 ; 花生, 裕之 ; Matsudaira, Mitsuo ; Takeuchi, Chino ; Demise, Mayumi ; Kondou, Kouji ; Hanao, Hiroyuki
出版情報: 繊維機械学会誌 = Journal of the Textile Machinery Society of Japan.  56  pp.T41-T47,  2003.  日本繊維機械学会 = Textile Machinery Society of Japan
URL: http://hdl.handle.net/2297/00049956
概要: 金沢大学人間社会研究域学校教育系<br />In order to evaluate fabric handle of top sheet of disposable diapers objectively, primary hands f or the top sheet were selected and defined from the opinions of consumers (mothers) who are using disposable diapers for their children. Four primary hands such as “NAMERAKASA”, “SOFUTOSA”, “KOSHI” and “FUKURAMI” were defined for the top sheet and they could ex-plain 87% of the descriptions used for hand evaluation. “NAMERAKASA” is considered to be a peculiar primary hand of top sheet of disposable diapers. Objective evaluation equation (DPC M-1) of the top sheet using those basic mechanical parameters was developed by stepwise re-gression method with high accuracy and small errors. 続きを見る
62.

論文

論文
楊, 暁旗 ; 楊, 敏壮 ; 松平, 光男 ; 近藤, 耕司 ; 花生, 裕之 ; Yang, Xiaoqi ; Yang, Minzhuang ; Matsudaira, Mitsuo ; Kondou, Kouji ; Hanao, Hiroyuki
出版情報: 繊維機械学会誌 = Journal of the Textile Machinery Society of Japan.  56  pp.T67-T73,  2003.  日本繊維機械学会 = Textile Machinery Society of Japan
URL: http://hdl.handle.net/2297/00049961
概要: 金沢大学人間社会研究域学校教育系<br />Water transfer behavior in disposable diapers was investigated by dynamic image processing system and following conclusions were obtained. Water transfer behavior is explained by three characteristic curves such as absorbed water, diffused water, and remained water on the top sheet. New parameters showing diffusion rate in horizontal and perpendicular directions are defined from the characteristic curves of diffused water. Wetting rate and water remaining rate of the top sheet are also defined from the characteristic curves of remained water. These parameters agree well with free water and flow water behavior from diapers and total quality of disposable diapers is evaluated objectively by these parameters. 続きを見る
63.

論文

論文
楊, 敏壮 ; 松平, 光男 ; Yang, Minzhuang ; Matsudaira, Mitsuo
出版情報: 繊維機械学会誌 = Journal of the Textile Machinery Society of Japan.  54  pp.T174-T179,  2001.  日本繊維機械学会 = Textile Machinery Society of Japan
URL: http://hdl.handle.net/2297/00049964
概要: 金沢大学人間社会研究域学校教育系<br />Swinging track, velocity, and acceleration of a fabric at a turn-round motion were studied precise ly with a dynamic drape tester made in trial using moving image processing system. Following conclusions were obtained. (1) Dynamic drape behavior of fabric is explained by some parameters measured by the moving image processing system. (2) These parameters have different information from conventional static drape coefficient, revolving drape increase coefficient, revolving drape coefficient at 200rpm, and dynamic drape coefficient at swinging motion, and have high correlation with fabric bending and shearing vibrational properties. (3) These parameters have strong correlation with subjective value about beautifulness of dynamic drape behaviors of fabrics. 続きを見る
64.

論文

論文
楊, 敏壮 ; 松平, 光男 ; Yang, Minzhuang ; Matsudaira, Mitsuo
出版情報: 繊維機械学会誌 = Journal of the Textile Machinery Society of Japan.  53  pp.T115-T120,  2000.  日本繊維機械学会 = Textile Machinery Society of Japan
URL: http://hdl.handle.net/2297/00049968
概要: 金沢大学人間社会研究域学校教育系<br />In the measurement of dynamic drape coefficient of fabrics, mean correlation coefficient between m easured data and regressed values of revolving drape increase coefficient ; Dr, shows the highest value if the straight region of 2 nd step is decided from 50 to 130 rpm. Standard deviation of the correlation coefficient becomes the smallest value in this region. Therefore, the revolving drape increase coefficient could be defined as the slope of dynamic drape coefficient versus revolution speed curves in the region between 50 and 130 rpm. Relationship between Dr, revolving drape coefficient at 200 rpm ; D200, and mechanical parameters of bending and shearing properties were studied precisely and the regression equations were derived from those mechanical parameters. It was shown clearly that Dr and D200 are controlled predominantly by shearing property rather than bending property as it has the effect on conventional static drape coefficient. 続きを見る
65.

論文

論文
楊, 敏壮 ; 秦, 黎 ; 松平, 光男 ; Yang, Minzhuang ; Qin, Li ; Matsudaira, Mitsuo
出版情報: 繊維機械学会誌 = Journal of the Textile Machinery Society of Japan.  54  pp.T57-T64,  2001.  日本繊維機械学会 = Textile Machinery Society of Japan
URL: http://hdl.handle.net/2297/00049969
概要: 金沢大学人間社会研究域学校教育系<br />To evaluate dynamic drape behavior of fabrics in swinging motion of fabrics, a testing device to m easure dynamic drapeability in continuous swinging motion was designed, and new adequate parameters that can represent dynamic drapeability of fabrics were defined and the stability of those parameters was discussed. Following conclusions were obtained. At the maximum angle in one-time swinging motion, fabrics were subjected to the largest acceleration and the projected area changed remarkably. It was concluded that the change of the projected area characterized dynamic drapeability of fabrics in swinging motion. Dynamic drape coefficient Ddwas defined as a parameter of the dynamic drapeability, and it maintained high accuracy and reproducibility. Ddand mechanical parameters of bending and shearing properties of fabrics were studied precisely and the regression equations were derived from those mechanical parameters. It was shown clearly that Ddwas controlled firstly by fabric weight, secondly by shearing property and bending property. 続きを見る
66.

論文

論文
楊, 暁旗 ; 楊, 敏壮 ; 松平, 光男 ; Yang, Xiaoqi ; Yang, Minzhuang ; Matsudaira, Mitsuo
出版情報: 繊維機械学会誌 = Journal of the Textile Machinery Society of Japan.  58  pp.T1-T6,  2005.  日本繊維機械学会 = Textile Machinery Society of Japan
URL: http://hdl.handle.net/2297/00049976
概要: 金沢大学人間社会研究域学校教育系<br />Kinematics study of liquid diffusion was carried out for disposable diapers using colored salt wat er. A three-layers model was proposed for disposable diapers, which consists of diffusion, absorption and waterproof layers. It was clarified that liquid diffusion was proceeded horizontally in the diffusion layer at first, and then vertically into the absorbed layer. The equation of diffusion rate of liquid in the horizontal direction was derived on the basis of the disk model of capillary tubes, which were arranged in radial direction. Diffusion rate of liquid in the vertical direction could be calculated from the velocity curves of diffused liquid. The significance of four characteristic parameters, diffusion rate of liquid in the horizontal direction Fw, diffusion rate of liquid in the vertical direction Fh, the maximum area ratio Sm and the remaining area ratio Sr, proposed in our earlier papers were proved to be valuable. 続きを見る
67.

論文

論文
楊, 暁旗 ; 楊, 敏壮 ; 松平, 光男 ; 近藤, 耕司 ; 花生, 裕之 ; Yang, Xiaoqi ; Yang, Minzhuang ; Matsudaira, Mitsuo ; Kondou, Kouji ; Hanao, Hiroyuki
出版情報: 繊維機械学会誌 = Journal of the Textile Machinery Society of Japan.  57  pp.T100-T105,  2004.  日本繊維機械学会 = Textile Machinery Society of Japan
URL: http://hdl.handle.net/2297/00049977
概要: 金沢大学人間社会研究域学校教育系<br />The water transfer behavior in disposable diapers was investigated by dynamic image analysis syste m using the colored salt water. The water transfer features are complex and the critical region of diapers occurs with the smaller amount of the water. New parameters showing the diffusion rate in the horizontal and perpendicular directions defined in the former paper could also be adapted for the salt water. The diffusion characteristics were also evaluated objectively by the four parameters and the three characteristic curves. The most suitable experimental conditions that can discriminate the difference between each sample were established as follows: quantity of flow; 6 ml/sec, amount of water pouring; 50 ml/times, the number of pouring repetition; 3 times. 続きを見る
68.

論文

論文
橋本, 康弘 ; 安達, 正明 ; Hashimoto, Yasuhiro ; Adachi, Masaaki
出版情報: 精密工学会学術講演会講演論文集 = 2004 JSPE Autumn Meeting.  2004 Autumn  pp.1085-1086,  2004.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049978
概要: 金沢大学理工研究域機械工学系<br />現在,非接触性,高感度性などの様々な利点からレーザを用いた光干渉応用計測技術が注目されているが、光干渉応用変形測定では光路差のサブミクロンオーダーの正確な制御が必要であり,振動や風等の影響を受ける通常 の環境下での応用はこれまで難しかった.本研究ではDSPI法に二波長レーザと共通光路干渉計を組み合わせて,突発変形に耐えうることのでき,さらには外乱の影響を受けにくい高精度変形測定法の開発を目的とした.<br />出版者照会後に全文公開 続きを見る
69.

論文

論文
安達, 正明 ; 高山, 稔 ; Adachi, Masaaki ; Takayama, Minoru
出版情報: 精密工学会学術講演会講演論文集 = 2004 JSPE Spring Meeting.  2004 Spring  pp.1255-1256,  2004.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049979
概要: 金沢大学理工研究域機械工学系<br />スペックル干渉計を用いると変形中の粗面に関して、2次元的変形分布の時間変化をサブミクロンオーダーで調べることができる。そこで、我々は変形挙動が複雑とされるジュラルミン薄板を引張り、その干渉像を高速デジ タルカメラで連続取り込みし、これまでに開発してきた解析方法で干渉位相の変化量を求め変形量を高精度に測定してみた。この測定結果に関して報告する。<br />出版者照会後に全文公開 続きを見る
70.

論文

論文
安達, 正明 ; 上田, 覚児 ; 五十島, 一興 ; Adachi, Masaaki ; Ueda, Kakuji ; Isojima, Kazuoki
出版情報: 精密工学会学術講演会講演論文集 = 2004 JSPE Spring Meeting.  2004 Spring  pp.1259-1260,  2004.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049980
概要: 金沢大学理工研究域機械工学系<br />白色干渉垂直走査型形状測定法では,干渉像の「位相とコントラスト情報」から光路差を抽出する.取込む画像毎の位相シフト量をπ/2 とするため、深い凹凸の測定には時間がかかった.そこで我々は青と黄色のLED を交互に点灯させ、青では位相シフト量が6π+π/2、黄色では6π-π/2となるようにし,干渉像を通常のCCD カメラで取込んで高速に形状測定をする方法を研究してきた.この方法の絶対精度に関してして報告する.<br />出版者照会後に全文公開 続きを見る
71.

論文

論文
五十島, 一興 ; 安達, 正明 ; 斎藤, 潤二 ; 嶋, 一史 ; 中山, 彰 ; 山宮, 広之 ; 小林, 友博 ; 杉森, 博 ; 谷, 浩之 ; Isojima, Kazuoki ; Saitoh, Junji ; Shima, Kazufumi ; Nakayama, Akira ; Adachi, Masaaki
出版情報: 精密工学会学術講演会講演論文集 = 2004 JSPE Spring Meeting.  2004 Spring  pp.1261-1262,  2004.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049981
概要: 金沢大学理工研究域機械工学系<br />白色干渉を応用した三次元形状計測装置を開発した.測定法は,物体と参照鏡が作る干渉縞の位相とコントラストから形状を高精度に算出する位相シフト法を用い,位相シフト量を2n π±π /2(n:自然数)とする ことにより,高速化を実現した.光源として波長の異なる2つのLEDを使用し,交互に点灯させそれぞれの波長の干渉像を取り込み,取り込んだ画像から形状を測定する.また,高精度で長ストロークな移動ステージを搭載することにより,高速・高精度な形状測定を目指す.<br />出版者照会後に全文公開 続きを見る
72.

論文

論文
安達, 正明 ; 平野, 勇輝 ; 河村, 昌範 ; 岩尾, 雄太 ; Adachi, Masaaki ; Hirano, Yuuki ; Kawamura, Masanori ; Iwao, Yuuta
出版情報: 精密工学会学術講演会講演論文集 = 2008 JSPE Autumn Meeting.  2008 Autumn  pp.195-196,  2008.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049983
概要: 金沢大学理工研究域機械工学系<br />垂直走査型干渉応用形状計測技術は極小部品の高精度3次元形状計測に広く利用されている.しかし振動環境下で利用しようとすると,適正な位相シフト量への制御ができない,段差形状の場合は上面と下面を異なる時間で 計測するため振動変位が誤差となる等の問題が発生し,使用できなかった.我々は走査型干渉顕微鏡に内蔵可能なリアルタイム変位計の開発を行ってきた.そして振動下でも計測できる高精度形状計測技術を開発した.<br />出版者照会後に全文公開 続きを見る
73.

論文

論文
安達, 正明 ; 高山, 稔 ; 松本, 哲也 ; 北川, 洋一 ; Adachi, Masaaki ; Takayama, Minoru ; Matsumoto, Tetsuya ; Kitagawa, Yoichi
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Spring Meeting.  2003 Spring  pp.434-434,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049985
概要: 金沢大学理工研究域機械工学系<br />アルミ薄板の引っ張り変形に関しては,変形現象が波のように周辺に伝播するなどの報告もあり,その詳細な変形挙動はあまり明らかになっていない。そこで,我々はこれまで開発してきた「連続取込スペックル干渉画像を 用いた変形測定法」をこの変形現象に応用し,変形測定を行った。この結果に関して報告する。<br />出版者照会後に全文公開 続きを見る
74.

論文

論文
安達, 正明 ; 平野, 勇輝 ; 泉澤, 俊裕 ; 五十島, 一興 ; Adachi, Masaaki ; Hirano, Yuki ; Senzawa, Toshihiro ; Isojima, Kazuoki
出版情報: 精密工学会学術講演会講演論文集 = 2007 JSPE Autumn Meeting.  2007 Autumn  pp.457-458,  2007.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049986
概要: 金沢大学理工研究域機械工学系<br />白色干渉顕微鏡による形状測定では,所定の光路差変更毎に干渉画像を多数枚取得することが求められる.我々は振動環境下でも使える装置を開発するために,顕微鏡に内蔵できるレーザー応用高速変位計の開発を試みた. 振動により光路差が変動していても,この高速変位計を用いれば,光路差が所定の値になった瞬間に白色干渉画像を取り込むことができ,3次元形状を正しく計測することが可能となるから.このレーザー応用高速変位計を開発した結果に関し報告する.<br />出版者照会後に全文公開 続きを見る
75.

論文

論文
安達, 正明 ; 丹原, 嘉彦 ; 岡田, 幸司 ; Adachi, Masaaki
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Spring Meeting.  2003 Spring  pp.458-458,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049987
概要: 金沢大学理工研究域機械工学系<br />1波長のレーザを用いた変形測定は,変形が小さく画像取込毎の変形による光路差変化量が半波長以内である時のみ応用が可能である。画像取込の前後で1波長以上の光路差変化がある場合は,そのような変形が多く存在す るにもかかわらずこれまで測定が出来なかった。そこで2波長のレーザを同時に用いる変形測定法をこれまで研究してきた。この開発結果について報告する。<br />出版者照会後に全文公開 続きを見る
76.

論文

論文
安達, 正明 ; 河村, 昌範 ; 岩尾, 雄太 ; Adachi, Masaaki ; Kawamura, Masanori ; Iwao, Yuuta
出版情報: 精密工学会学術講演会講演論文集 = 2009 JSPE Autumn Meeting.  2009 Autumn  pp.495-496,  2009.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049988
概要: 金沢大学理工研究域機械工学系<br />垂直走査型干渉顕微鏡を用いる形状計測法は外部振動の影響を極めて受けやすい.我々は,外部振動の影響を受けない形状測定法の開発を目指して,測定対象とする粗面が作る干渉像の垂直走査に伴う変化から,干渉計の光 路差変化量を高精度に測定する方法を研究して来た.そして,粗面でも光路差変化量が測定可能であることを確認した.今回は,用いる対物レンズの開口の大きさの測定値への影響を実験的に調べたので報告する.<br />出版者照会後に全文公開 続きを見る
77.

論文

論文
上田, 覚児 ; 安達, 正明 ; 稲部, 勝幸 ; 五十島, 一興 ; Ueda, Kakuji ; Adachi, Masaaki ; Inabe, Katsuyuki ; Isojima, Kazuoki
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Autumn Meeting.  2003 Autumn  pp.496-496,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049989
概要: 金沢大学理工研究域機械工学系<br />白色干渉を応用した形状測定法では,物体と参照鏡が作る干渉縞の位相とコントラストから形状を高精度に算出する.一般に,取り込む画像毎の位相シフト量をπ/2とすることが多いが,本研究では位相シフト量を2nπ ±π/2(n:自然数)とし,シフトスピードを速める.また,光源として波長の異なる2つのLEDを使用し,交互に点灯させそれぞれの波長λ1,λ2の干渉像を取り込み,取り込んだ画像から形状を測定する研究をしている.<br />出版者照会後に全文公開 続きを見る
78.

論文

論文
吉田, 晶 ; 安達, 正明 ; 天野, 原成 ; Yoshita, Akira ; Adachi, Masaaki ; Asano, Motonari
出版情報: 精密工学会学術講演会講演論文集 = 2006 JSPE Autumn Meeting.  2006 Autumn  pp.699-670,  2006.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049990
概要: 金沢大学理工研究域機械工学系<br />豆腐をはじめとするゲル状物質内部の凝固状態を非接触,非破壊的に計測する手法の開発を目的としている.レーザをゲル状物質に照射するとスペックルパターンが得られる.本研究では,スペックルパターンの時間的また は空間的変化を用いて凝固状態の違いを捉えることが課題である.<br />出版者照会後に全文公開 続きを見る
79.

論文

論文
安達, 正明 ; Adachi, Masaaki
出版情報: 精密工学会学術講演会講演論文集 = 2009 JSPE Spring Meeting.  2009 Spring  pp.799-800,  2009.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049992
概要: 金沢大学理工研究域機械工学系<br />Vertical-scanning interferometries using white light are widely used to measure 3D shape of small st ep-like objects with high speed and high precision. This type of interferometry is being refined for more precision, more speed and more stable even in vibrating environment. In this key-note speech, I summarize our research processes to obtain high-speed and high-precision performance in 3D-shape measurement. Our processes have included technologies using two color LED, new phase shift algorithm, and an optical path difference(OPD) meter. I briefly compare our technologies with newly proposed techniques. I hope my comparison will stimulate many kinds of discussions. 微細段差加工が多用される時代を迎え,光干渉を用いた3次元形状測定技術は扱いやすさ,高速性,高精度性などから色んな所で使われています.この形状測定技術はさらなる高精度性や高速性の追求,また振動下での応用等を求めて種々の手法がまだまだ導入されつつあります.ここでは我々が開発してきた手法を紹介し,それとの簡単な比較を通して各種の手法に関する皆様の活発な議論の展開を図りたいと思います.<br />出版者照会後に全文公開 続きを見る
80.

論文

論文
安達, 正明 ; 河村, 昌範 ; 岩尾, 雄太 ; Adachi, Masaaki ; Kawamura, Masanori ; Iwao, Yuuta
出版情報: 精密工学会学術講演会講演論文集 = 2009 JSPE Spring Meeting.  2009 Spring  pp.807-808,  2009.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049993
概要: 金沢大学理工研究域機械工学系<br />干渉顕微鏡を用いた垂直走査型3D形状計測では観察面を一定量高精度に垂直移動させながら干渉画像を取得する必要がある.この方法を振動環境下でも使用したいと考える.そこで顕微鏡観察下の粗面の垂直変位量をライ ンカメラで高精度に計測する手法を研究した.実験では垂直走査しながら2Dカメラを用いて干渉像を連続取込みし,複数線上の光強度を抜き出し,抜き出し位置による変位測定値の違いが最小になる処理方法を追求した.<br />出版者照会後に全文公開 続きを見る
81.

論文

論文
西川, 司 ; 浅川, 直紀 ; 平尾, 政利 ; 勘定, 善弘 ; Nishikawa, Tsukasa ; Asakawa, Naoki ; Hirao, Masatoshi ; Kanjo, Yoshihiro
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Autumn Meeting.  2003 Autumn  pp.610-610,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049996
概要: 金沢大学理工研究域機械工学系<br />本研究は,CADデータに基づき,産業用ロボットを用いて溶接作業を自動化することを目的とする.実際の造船・橋梁などの現場では複雑で狭隘部を持つ構造が多く,それらの溶接の際には溶接トーチと工作物との干渉が 生じる可能性が高い.そこで本報では工作物のCADデータを利用し,溶接トーチの干渉を考慮した作業経路を生成し,動作プログラムを自動生成するシステムの開発を試みた.また,実際に工作物のCADデータに対してシステムを適用し,その動作を検証した.<br />出版者照会後に全文公開 続きを見る
82.

論文

論文
新谷, 俊彦 ; 浅川, 直紀 ; 平尾, 政利 ; Shintani, Toshihiko ; Asakawa, Naoki ; Hirao, Masatoshi
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Autumn Meeting.  2003 Autumn  pp.611-611,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00049997
概要: 金沢大学理工研究域機械工学系<br />多関節ロボットは各種作業に投入されており用いられる工具も様々である。ロボット用工具の特徴をXMLにより記述することにより、工具データの意味付けを行い作業者本位のインターフェイスを構築することを目的とす る.<br />出版者照会後に全文公開 続きを見る
83.

論文

論文
藤井, 辰徳 ; 浅川, 直紀 ; 平尾, 政利 ; 勘定, 善弘 ; Fujii, Tatsunori ; Asakawa, Naoki ; Hirao, Masatoshi ; Kanjo, Yoshihiro
出版情報: 精密工学会学術講演会講演論文集 = 2005 JSPE Autumn Meeting.  2005 Autumn  pp.723-724,  2005.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050000
概要: 金沢大学理工研究域機械工学系<br />The study deals with an automation of the welding by generating the control command for the welding robot automatically. Generally, a movement of a robot is decided depending on the tool path – a series of position and posture of the tool attached to the mechanical interface – of the robot. We tried to generate the tool path focused on a collision avoidance of the welding tool on the bases of CAD data of the workpiece. In the study, to cope with a characteristic of the welding, which is required to be continuous in tool velocity and posture, the tool path is generated by use of a potential field in a configuration space. As a result, the system is found effective to generate smooth and collision–free tool path本研究では溶接用ロボットの動作プログラムを自動生成することによって溶接作業を自動化することを目的とする.ロボットの動作は,先端の工具の位置と姿勢によって決定される.そこで本報では工作物のCADデータを利用し,溶接工具の干渉を考慮した工具経路の生成を試みた.溶接作業では,工具の速度や工具姿勢の急激な変化を嫌うという特徴があるが,ポテンシャル場を用いることで対応した.<br />出版者照会後に全文公開 続きを見る
84.

論文

論文
古本, 達明 ; 上田, 隆司 ; 細川, 晃 ; 田中, 隆太郎 ; 嵐, 友哉 ; 杉原, 成良 ; 和賀, 正明 ; 今野, 明 ; Furumoto, Tatsuaki ; Ueda, Takashi ; Hosokawa, Akira ; Tanaka, Ryutaro ; Arashi, Tomoya ; Sugihara, Nariyoshi ; Waga, Masaaki ; Konno, Akira
出版情報: 精密工学会学術講演会講演論文集 = 2006 JSPE Spring Meeting.  2006 Spring  pp.1271-1272,  2006.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050002
概要: 金沢大学理工研究域機械工学系<br />In dental treatment with Nd:YAG laser, the laser beam which ordinarily comes out from the optical fi ber is effective to eliminate the enamel and the dentin. A diffused and circumferential laser beam, which is produced by using a processed optical fiber at the tip, is effective for the treatment of soft tissue. In this report, the processing characteristics of the enamel and the dentin by the titanium–processed fiber (TP fiber) are investigated. On the cavity made in the enamel and the dentin, the volume and maximum depth are measured by a 3D surface profiling system and compared with that of the non–processed fiber. Furthermore, the cavity of the enamel made by Nd:YAG laser beam are observed by the high–speed video camera. 本研究は,Nd:YAGレーザを用いた高度歯科治療の実現を目的として行っている.これまで,ファイバ先端を酸化チタン粉末で加工してレーザ直進光を減衰させ,360度全方位にレーザ照射を行う手法を提案した.そして,加工条件の検討により先端のエネルギ分布が調整可能なことを示した.本報告では,先端加工ファイバを用いた歯質の窩洞形成特性を調べると共に,その歯質表面を高速度カメラで撮影した内容について考察する.<br />出版者照会後に全文公開 続きを見る
85.

論文

論文
古本, 達明 ; 上田, 隆司 ; 加納, 康弘 ; 細川, 晃 ; 田中, 隆太郎 ; Furumoto, Tatsuaki ; Ueda, Takashi ; Kano, Yasuhiro ; Hosokawa, Akira ; Tanaka, Ryutaro
出版情報: 精密工学会学術講演会講演論文集 = 2009 JSPE Autumn Meeting.  2009 Autumn  pp.293-294,  2009.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050003
概要: 金沢大学理工研究域機械工学系<br />Recently, a multifunction machine, in which a ferrous based powder bed is selectively heated and fus ed by a laser beam irradiation and the edge of consolidated structure obtained is cut with end mill, has been developed to produce an injection molding die. This device has an advantage that the molding die does not have to divide into each block for locating the cooling channels. However, it has difficulty finishing the inner wall located as cooling channels in the injection mold. This paper deals with a polishing of inner wall with flowing slurry at high performance. In order to investigate the influence of various conditions on the polishing of the inner wall, the effects of grain size and polishing time on the polishing characteristics are evaluated experimentally. 近年,金属粉末の積層造形と造形物表面の仕上げ加工を複合化し,高精度に射出成形用金型を造形する加工機が開発され注目されている.本研究では,同装置で製作した金型の冷却水管について,その内面を遊離砥粒でクリーニングを行う新しい加工法を提案する.まずまじめに,その加工原理と各加工条件が内面性状に与える影響について調べた結果について報告する.<br />出版者照会後に全文公開 続きを見る
86.

論文

論文
古本, 達明 ; 舟田, 義則 ; 上田, 隆司 ; 恩地, 好晶 ; Furumoto, Tatsuaki ; Ueda, Takashi
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Autumn Meeting.  2003 Autumn  pp.326-326,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050004
概要: 金沢大学理工研究域機械工学系<br />超砥粒を用いたスティック砥石の製造は,ダイヤモンドブレード等による機械切断で行われているのが現状であり,リードタイムの短縮と歩留まりの向上が課題となっている.本研究は,パルスYAGレーザ加工技術を適用 して課題解決を図ることを目標としており,今回は第2報として,ダイヤモンドおよびCBN砥石のレーザ加工特性と共に,レーザ切断する際に生じる加工熱が,砥石強度に及ぼす影響をまとめた結果を報告する.<br />出版者照会後に全文公開 続きを見る
87.

論文

論文
古本, 達明 ; 上田, 隆司 ; 舟田, 義則 ; 恩地, 好晶 ; Furumoto, Tatsuaki ; Ueda, Takashi ; Funada, Y. ; Ogura, Hidekazu
出版情報: 精密工学会学術講演会講演論文集 = 2004 JSPE Autumn Meeting.  2004 Autumn  pp.349-350,  2004.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050005
概要: 金沢大学理工研究域機械工学系<br />本研究は、レーザ切断による超砥粒砥石の生産性向上を目的として行っている。これまで、3mm厚のビトリファイドボンド砥石が切断可能で、レーザ切断面の熱変質層が砥石としての性能を低下させるが、気孔を塞ぐため に強度を上げる働きがあることを示した。本報告では、さらにレーザ光吸収特性や熱伝導特性を調べ、超砥粒砥石のレーザ切断の適用性について検討すると共に、メタルボンド砥石のレーザ切断特性について報告する。<br />出版者照会後に全文公開 続きを見る
88.

論文

論文
古本, 達明 ; 上田, 隆司 ; 嵐, 智哉 ; 杉原, 成良 ; 和賀, 正明 ; 今野, 明 ; Furumoto, Tatsuaki ; Ueda, Takashi ; Arashi, Tomoya ; Sugihara, Nariyoshi ; Waga, Masaaki ; Konno, Akira
出版情報: 精密工学会学術講演会講演論文集 = 2005 JSPE Autumn Meeting.  2005 Autumn  pp.401-402,  2005.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050006
概要: 金沢大学理工研究域機械工学系<br />In dental treatment with Nd:YAG laser, the laser beam which ordinarily comes out from the optical fi ber is effective to eliminate the enamel and the dentin. A diffused and circumferential laser beam, which is produced by using a processed optical fiber at the tip, is effective for the treatment of soft tissue. In the present study, processing characteristics at the tip of the optical fiber is investigated, when TiO2 powder with average grain size of 1mm is used. An experimental instrument is developed to measure the power and the energy distribution of the straight beam radiated from the processed optical fiber. Furthermore, on the cavity made in the enamel by the straight beam, the volume and maximum depth are measured by a 3D surface profiling system and the surface is observed by SEM.本研究は,Nd:YAGレーザによる歯科治療の高度化を目的として行っている。歯科医療では,酸化チタン粉末を用いてファイバ先端を加工し,ファイバコアにレーザを吸収させて熱に変換することで,直進光を減衰させて臨床に用いている。そこで,加工したファイバからの直進光や先端部の温度を計測して,ファイバ加工条件と加工特性の関係を調べた。また,加工ファイバで抜去歯エナメル質へレーザ照射して窩洞形成特性を調べた。<br />出版者照会後に全文公開 続きを見る
89.

論文

論文
古本, 達明 ; 上田, 隆司 ; Abdullah, Yassin ; 細川, 晃 ; 田中, 隆太郎 ; 阿部, 諭 ; Furumoto, Tatsuaki ; Ueda, Takashi ; Yassin, Abdullah ; Hosokawa, Akira ; Tanaka, Ryutaro ; Abe, Satoshi
出版情報: 精密工学会学術講演会講演論文集 = 2007 JSPE Autumn Meeting.  2007 Autumn  pp.495-496,  2007.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050008
概要: 金沢大学理工研究域機械工学系<br />In order to manufacture the part of a small lot at lower cost and shorter lead-time, various techniq ues, such as a rapid tooling, reverse engineering and high speed milling, are proposed. Recently, milling-combined laser metal sintering system (MLMS), which is the devise of sintering the metal powder and milling the sintered metal with end mill at the one process, has been developed to produce the injection molding dies. In this report, the sintering characteristics of the metal powder used for rapid tooling with Yb:fiber laser are described. Relationship between the surface roughness of the plate and sintering conditions, such as a scanning speed and laser power, are investigated. Moreover, the adhesion force between the each plate and the sintered line are measured with dynamometer. 本研究は,ファイバーレーザを用いて金属粉末を高精度に三次元造形することを目的として行っている.異なる面性状を有する鋼材プレート上に,ファイバーレーザを用いてライン焼結を行い,レーザ焼結条件と各種プレート上における焼結特性との関係を調べると共に,燒結金属の切削特性を調べてプレートに対する密着強度を評価している.<br />出版者照会後に全文公開 続きを見る
90.

論文

論文
阿部, 諭 ; 東, 喜万 ; 不破, 勲 ; 古本, 達明 ; Abe, Satoshi ; Higashi, Yoshikazu ; Fuwa, Isao ; Furumoto, Tatsuaki
出版情報: 精密工学会学術講演会講演論文集 = 2007 JSPE Autumn Meeting.  2007 Autumn  pp.497-498,  2007.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050009
概要: 金沢大学理工研究域機械工学系<br />In the Milling Combined Laser Metal Sintering Process, the overhang shape is formed in the side of t he work piece when the following layer is sintered after completing the side of the work piece by milling process. The processing time is long, because the overlapped area to have contained the overhang shape has to be milled. Therefore, making the overhang shape small is required. This paper proposes the laser sintering pattern to reduce the overhang shape, evaluating of how it is formed in the sintering process after the milling process. 金属光造形複合加工法では,ワーク側面の切削仕上げ後,次層のレーザ焼結を行うため,側方と下方に余剰硬化部が形成され,余剰硬化部を含むように切削領域をオーバーラップするので加工時間が増大する。加工時間を短縮するためには余剰硬化部を小さくすることが要求される。本報では,切削仕上工程後の積層焼結工程において,余剰硬化部が層ごとにどのように形成されるかを評価し,余剰硬化部を削減するレーザ照射方法を提案する.<br />出版者照会後に全文公開 続きを見る
91.

論文

論文
古本, 達明 ; 上田, 隆司 ; 尾倉, 秀一 ; Furumoto, Tatsuaki ; Ueda, Takashi ; Ogurai, Hidekazu
出版情報: 精密工学会学術講演会講演論文集 = 2005 JSPE Spring Meeting.  2005 Spring  pp.535-536,  2005.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050010
概要: 金沢大学理工研究域機械工学系<br />In the production of a mounted wheel, a super abrasive stone before sintered is drilled mechanically for inserting a grinding head axis. In this study, a pulsed Nd:YAG laser is used to make a small hole for an axis, and CBN and diamond stones sintered are used as work material. The cutting characteristics of the super abrasive stone are studied for the improvement of the productivity. The super abrasive stone of 5mm in thickness can be cut precisely and there is no chipping at the edge. The heat-affected zone produced by laser irradiation is effective for bonding the axis into the wheel. 超砥粒軸付き砥石への軸の取り付け穴加工は,焼結後に穴加工することが困難であるため,焼結前に下穴加工を行い,焼結後に仕上げ加工するのが一般的である.しかしながら,この加工法では下穴が焼成収縮の影響を受けるため,品質毎の調整が必要となるなど課題が多い.そこで,本研究では軸付き砥石の生産性向上のため,レーザによる超砥粒砥石への穴加工を提案し,ドリル加工との比較を行ったのでその結果を報告する.<br />出版者照会後に全文公開 続きを見る
92.

論文

論文
古本, 達明 ; Abdullah, Yassin ; 塚本, 卓 ; 上田, 隆司 ; 細川, 晃 ; 田中, 隆太郎 ; 阿部, 諭 ; Furumoto, Tatsuaki ; Yassin, Abdullah ; Tukamoto, Takashi ; Ueda, Takashi ; Hosokawa, Akira ; Tanaka, Ryutaro ; Abe, Satoshi
出版情報: 精密工学会学術講演会講演論文集 = 2007 JSPE Spring Meeting.  2007 Spring  pp.841-842,  2007.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050011
概要: 金沢大学理工研究域機械工学系<br />A simple measurement method of a thermal conductivity in fine metal powder for rapid prototyping is proposed. When the heating time to the metal powder t is short enough compared with the time until the metal powder reaches the maximum temperature T (t/T<0.1), and the measurement depth from a surface Z is longer than the diameter of the heat source a (Z/a>1.23), it is shown that the thermal conductivity of a metal powder can be calculated precisely by measuring the time that the temperature reaches the maximum value. As work materials, SCM powder and copper powder are used. As a result, the thermal conductivity of a metal powder and a sintered material are quite small compared with that of a metal, and the materials, the shapes and the diameter of a metal powder have little influence on the thermal conductivity. 金属粉末をレーザ焼結するとき,レーザ光の吸収特性や生じた熱の伝導特性を知ることが重要となる.本研究では,粉末表面に照射したレーザ光で生じた熱が,粉末内部の一定距離離れた位置まで伝導する時間を測定することで,簡易的に粉末の熱伝導率を導出する手法を提案している.また,同手法で金属粉末の材質,粒径,形状の違いによる熱伝導率の変化を調べると共に,レーザ焼結した材料の焼結条件と熱伝導特性について調べている.<br />出版者照会後に全文公開 続きを見る
93.

論文

論文
細川, 晃 ; 佐藤, 孝志 ; 山田, 啓司 ; 上田, 隆司 ; Hosokawa, Akira ; Sato, Takashi ; Yamada, Keiji ; Ueda, Takashi
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Autumn Meeting.  2003 Autumn  pp.240-240,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050013
概要: 金沢大学理工研究域機械工学系<br />前報ではA系砥石を対象として,種々のドレス条件で作成した異なった砥石作業面を研削音で識別できることを示した.本報では,無気孔型超砥粒砥石への適用性について検討している.レジンボンドCBN砥石について, 砥粒突出し量を変化させて異なった状態を形成した場合,研削音によって識別可能であることがわかった.ただし,A系砥石と異なり,識別に用いる周波数帯域によって識別精度が大きく影響を受ける.このことより,砥石作業面の特徴を顕著に表す周波数領域を用いる必要性が確認された.<br />出版者照会後に全文公開 続きを見る
94.

論文

論文
吉田, 剛 ; 細川, 晃 ; 古本, 達明 ; 田中, 隆太郎 ; 上田, 隆司 ; Yoshida, Takeshi ; Hosokawa, Akira ; Furumoto, Tatuaki ; Tanaka, Ryutaro ; Ueda, Takashi
出版情報: 精密工学会学術講演会講演論文集 = 2008 JSPE Spring Meeting.  2008 Spring  pp.311-312,  2008.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050014
概要: 金沢大学理工研究域機械工学系<br />Nd:YAGレーザによるメタルボンドダイヤモンド砥石のレーザドレッシング法を検討している.これまで,レーザと同時にエアを吹き付けることによって,ボンド剤が再凝固する前に除去できることを明らかにした.本 法では,さらなる効率化とより実用的な観点から,レーザとエアを同時に照射可能な一体型ヘッドを作製し,それによるドレッシング特性を検討している.<br />出版者照会後に全文公開 続きを見る
95.

論文

論文
高山, 裕規 ; 神谷, 好承 ; 関, 啓明 ; 疋津, 正利 ; Takayama, Yuki ; Kamiya, Yoshitsugu ; Seki, Hiroaki ; Hikizu, Masatoshi
出版情報: 精密工学会学術講演会講演論文集 = 2005 JSPE Autumn Meeting.  2005 Autumn  pp.161-162,  2005.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050015
概要: 金沢大学理工研究域機械工学系<br />We consider position and posture control of work grasped by three–fingered robot hand whose finger h as two degree of freedom. As the first step in this study, this paper proposes the method of planning finger′s operation which is independent of a work shape. When the robot hand grasps a work, its three fingertips form a triangular plane. By using this plane, in the proposal method, the finger′s operation which controls the work is extrapolated from the finger′s operation which controls the plane. We derive a relationship between the motion of the fingers and the triangular plane and investigate effectiveness of the proposed method in simulations. 本研究では2自由度3本指ハンドによる物体の位置·姿勢制御を対象とする。操作対象物体を把持したとき、ハンドは3つの指先が存在する特定の平面を形成する。この平面に着目すると、ハンドによる物体の操作を平面の操作として扱うことができると考えられる。そこで本研究ではこれを利用して、物体操作時に形状などの複雑な情報を必要としない指先動作計画法を提案し、シミュレータによる検証を行った。<br />出版者照会後に全文公開 続きを見る
96.

論文

論文
松本, 秀幸 ; 神谷, 好承 ; 関, 啓明 ; 疋津, 正利 ; 野村, 久直 ; Matsumoto, Hideyuki ; Kamiya, Yoshitsugu ; Seki, Hiroaki ; Hikizu, Masatoshi ; Nomura, Hisanao
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Autumn Meeting.  2003 Autumn  pp.617-617,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050018
概要: 金沢大学理工研究域機械工学系<br />宇宙や原子炉近傍など人間にとって立ち入りにくい環境や過酷な環境での作業を遠隔操作で安全に行うためにマスタ・スレーブ・システムが用いられる.本研究では,そのアクチュエータとして,サーボモータの代わりにス テップモータを使用し,かつ通常のサーボモータのようにセンサフィードバックによる力制御を可能にする制御手法を提案するとともに,実際にマスタ・スレーブ・システムを構築し,制御性能の評価を試みる.<br />出版者照会後に全文公開 続きを見る
97.

論文

論文
黒部, 利次 ; 森田, 知之 ; 山本, 資治 ; Kurobe, Toshiji ; Morita, Tomoyuki ; Yamamoto, Motoharu
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Autumn Meeting.  2003 Autumn  pp.247-247,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050019
概要: 金沢大学理工研究域機械工学系<br />平均粒径5nmのダイヤモンドを用いて電気泳動法により粘弾性砥石を作製し,それを用いてシリコンウエハの精密研磨加工を行った.その結果,砥石は研磨能力を有していることが明らかとなった.<br />出版者照 会後に全文公開 続きを見る
98.

論文

論文
黒部, 利次 ; 守吉, 信乃 ; Kurobe, Toshiji ; Moriyoshi, Akino
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Spring Meeting.  2003 Spring  pp.405-405,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050020
概要: 金沢大学理工研究域機械工学系<br />高速流動研磨法を用いてステンレス鋼曲がり管内壁面の精密研磨を行った.新しくゴム紐製のマンドレルを作製し,適度の張力を付与した状態で管内に挿入した.そして,管内壁面とゴム芯との間に微小な隙間(クリアラン ス)を作り出すことに成功した.スラリーは隙間を高速で流れ研磨を行う.実験の結果,研磨は良好に行えることがわかった.表面粗さの低減度合いはパス回数に依存し,パス回数が増すにつれて表面粗さは小さくなった.<br />出版者照会後に全文公開 続きを見る
99.

論文

論文
黒部, 利次 ; 森田, 知之 ; 郡, 幸平 ; Kurobe, Toshiji ; Morita, Tomoyuki ; Koori, Kouhei
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Spring Meeting.  2003 Spring  pp.329-329,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050021
概要: 金沢大学理工研究域機械工学系<br />電気泳動現象を利用したボールの回転スピン制御研磨装置を新しく開発した.ラップ盤を正電極とし,負電極を三軸回転ラップ盤の隙間に挿入した.研磨液は,微粉のアルミナ砥粒をイオン交換水中に懸濁したものである. 電圧を一定にして研磨を行うと,加工時間の経過とともに表面粗さは次第に低減していく.また,印加電圧を大きくすると,表面粗さは電圧に比例して小さくなった.<br />出版者照会後に全文公開 続きを見る
100.

論文

論文
黒部, 利次 ; Kurobe, Toshiji
出版情報: 精密工学会学術講演会講演論文集 = 2003 JSPE Autumn Meeting.  2003 Autumn  pp.66-66,  2003.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050022
概要: 金沢大学理工研究域機械工学系<br />出版者照会後に全文公開