1.

図書

図書
小方厚, 菅晃一, 楊金峰著
出版情報: 吹田 : 大阪大学出版会, 2012.3
所蔵情報: loading…
2.

図書

図書
レーザー学会編
出版情報: 東京 : オーム社, 2011.12
所蔵情報: loading…
3.

図書

図書
田野保雄編集
出版情報: 東京 : 文光堂, 2009.3
シリーズ名: 眼科プラクティス / 田野保雄 [ほか] 責任編集 ; 26
所蔵情報: loading…
4.

図書

図書
出版情報: 東京 : オプトロニクス社, 2005.11
所蔵情報: loading…
5.

図書

図書
根本承次郎著
出版情報: 東京 : 培風館, 2001.11
所蔵情報: loading…
6.

図書

図書
櫛田孝司編
出版情報: 東京 : 丸善, 2000.6
シリーズ名: 丸善実験物理学講座 / 櫛田孝司 [ほか] 編 ; 9
所蔵情報: loading…
7.

図書

図書
中野人志著
出版情報: 東京 : コロナ社, 2016.10
所蔵情報: loading…
8.

図書

図書
黒澤宏著
出版情報: 東京 : オプトロニクス社, 2017.4
所蔵情報: loading…
9.

論文

論文
古本, 達明 ; 上田, 隆司 ; Abdullah, Yassin ; 細川, 晃 ; 田中, 隆太郎 ; 阿部, 諭 ; Furumoto, Tatsuaki ; Ueda, Takashi ; Yassin, Abdullah ; Hosokawa, Akira ; Tanaka, Ryutaro ; Abe, Satoshi
出版情報: 精密工学会学術講演会講演論文集 = 2007 JSPE Autumn Meeting.  2007 Autumn  pp.495-496,  2007.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050008
概要: 金沢大学理工研究域機械工学系<br />In order to manufacture the part of a small lot at lower cost and shorter lead-time, various techniq ues, such as a rapid tooling, reverse engineering and high speed milling, are proposed. Recently, milling-combined laser metal sintering system (MLMS), which is the devise of sintering the metal powder and milling the sintered metal with end mill at the one process, has been developed to produce the injection molding dies. In this report, the sintering characteristics of the metal powder used for rapid tooling with Yb:fiber laser are described. Relationship between the surface roughness of the plate and sintering conditions, such as a scanning speed and laser power, are investigated. Moreover, the adhesion force between the each plate and the sintered line are measured with dynamometer. 本研究は,ファイバーレーザを用いて金属粉末を高精度に三次元造形することを目的として行っている.異なる面性状を有する鋼材プレート上に,ファイバーレーザを用いてライン焼結を行い,レーザ焼結条件と各種プレート上における焼結特性との関係を調べると共に,燒結金属の切削特性を調べてプレートに対する密着強度を評価している.<br />出版者照会後に全文公開 続きを見る
10.

論文

論文
細川, 晃 ; 柚木, 力 ; 上田, 隆司 ; 山田, 啓司 ; 田中, 隆太郎 ; Hosokawa, Akira ; Yunoki, Tsutomu ; Ueda, Takashi ; Yamada, Keiji ; Tanaka, Ryutaro
出版情報: 精密工学会学術講演会講演論文集 = 2005 JSPE Spring Meeting.  2005 Spring  pp.869-870,  2005.  精密工学会 = The Japan Society for Precision Engineering
URL: http://hdl.handle.net/2297/00050310
概要: 金沢大学理工研究域機械工学系<br />This study deals with a laser dressing of a metal-bonded diamond wheel as part of a laser conditioni ng of superabrasive grinding wheels including truing, sharpening and cleaning. A bronze bond diamond stone SD120N75B is chosen as target to be dressed and pulsed Nd:YAG laser is irradiated in order to remove the bond material. The bond material is partially removed by laser irradiation, in which melting and vaporizing take place. In order to efficiently remove the bond material, it is necessary to spray air on the laser irradiating spot so as to blow away the molten binder before it solidifies again, although the molten metal cannot be perfectly taken away due to its relatively high viscosity. Clear damages of diamond particles such as micro-cracks or graphitization are not observed below the laser power is less than 152 W.Nd:YAGレーザを用いたメタルボンドダイヤモンド砥石(SD120N75NB)のレーザドレッシング法について検討している.ホイールにレーザを照射するとブロンズボンドは溶融除去されるが,多くは再凝固するため,効率的にボンド剤を除去するためには圧縮空気によって溶融部を吹き飛ばす必要がある.レーザの照射エネルギーを152W以下に制限することによって,ダイヤモンド砥粒に熱的ダメージをあまり与えることなく結合剤を除去することができる.<br />出版者照会後に全文公開 続きを見る